IP Telephony and Phones

Multiple lines incoming calls display

Hi,i have a problem that coluld be common but i'm not finding a solution on this forum and on CUCM console. I have CUCM 7.1.3 and, for example, 3 phones: - PhoneA with 2 lines: DN 2001, 2002 - PhoneB with 1 line: DN 2003 - PhoneC with 1 line: DN 2004...

Resolved! Music On Hold doesn't play after drop through in the TCL script

Hi All,I have two hunt groups configured. Both of them are configured with drop-through option in the BACD TCL script. When no agent in the queue, I heard the customized dropthrough welcome greetings and then it ask me to wait. But suddenly it just d...

Call Pickup on second line

Hi,i have a strange issue on Call Pickup feature (i use CUCM 7.1.3) :- i configure Call Pickup Group- I have 2 DN's assigned to this Pickup Group- I have 2 7962 phones and i put this 2 DN's ON THE FIRST LINE (first button) of both phones- the Call Pi...

Issue with Upgrading IP Phones

Heys guys,I am facing a serious issue with some IP Phone - 7942/61/41 . I did some hardware changes last week and did a reset on every phone, which should be stored in our stock. Most of the phones restarted and loaded the software without any issues...

Unity Connection -- CME integration

Hi people.I have some issues when integration UC-CME via SCCP. Every thing works just fine except MWI lights do not work on SIP phones.Here is the config from CME router:voice service voipallow-connections sip to sipno supplementary-service sip moved...

Is there a way to list the configuration in call manager

Is there a way to list out the configuration of call manager like you would with a cisco switch or router? (sho run)I'd like to do things like search for what forwards to a certain extension, and that would be a lot easier if I could see the entire c...

(CUCM-CME) Failure of joining Meetme of another cluster while using ITSP trunk for incoming/outgoing calls

Dear Cisco Community,We have a Cisco Unified Communications Manager Express Version 4.2(0) that it is located in a remote site and uses a SIP trunk with an ITSP (udp 5060), in respect to the incoming/outgoing calls.The configuration of the SIP trunk ...

Resolved! Conference call and other features

Can we have Conference call and other features whenanlaog phone is connected to Gateway on fxs and the Gateway(h323) is connected to PBX(Nortel) through PRI.[analog phone -> GW -> PBX]Regards.

IP phones 7942 are rebooting after uploading SIP firmware

Hi,I have test lab with one router 1861 and four IP phone 7942 which are connected to switchport on router 1861.I have implemented with SCCP that time it was working fine but when I configured with SIP firmware cmterm-7942_7962-sip.8-5-3SR1.zip , all...

CME-GUI:Unable to Configure ephones Past max-ephone Count

Hello,I swear I have seen a Netpro post or bug ID on this issue but my search has come up empty. Customer is running CME 8.5 on 2821 and I configured the ephone IDs to match the last two digits of the person's extension. Some of these ephone ID num...

Resolved! CUCM Hard Drive Upgrade

I am currently running CUCM 7.1(5)SU2 and I am looking to upgrade to 8.5(1) but I noticed in the documentation that it states that I should have at least 146 GB drives int he servers. I have a Publisher and Subscriber that both have only 72GB drives...

Resolved! Change from 4 to 10 digit dialing

Hi All,I have a general question that I am hoping someone can offer help with.We have 8 sites that are currently on 4 digit dialing. I would like to change them to 10 digit dialing. What is the general process for doing this? What all is involved?I...

Resolved! Unity 7 Server Replacement

Hi,If I want to gradually move users from one Unity 7 to another Unity 7, would the following steps be appropriate in order:1)Run Cobras Export on existing server2)Run Cobras Import on the new server3)Run GSM everytime I want to move users from exist...

Unity 4 backup voicemails

I have a Cisco Unity 4 and I need to know if there's a way I can backup the voicemails of a person and then export it to an external drive.Regards!

Headset & handset use for IP phone

Hi,Can both headset & handset be used simultaneously on Cisco 6921 IP phone ? Means can same call be heard on headset & handset at same time ?Regards,Andersson

IP Telephony and Phones

Forum Posts

Multiple lines incoming calls display

Resolved! Music On Hold doesn't play after drop through in the TCL script

Call Pickup on second line

Issue with Upgrading IP Phones

Unity Connection -- CME integration

Is there a way to list the configuration in call manager

(CUCM-CME) Failure of joining Meetme of another cluster while using ITSP trunk for incoming/outgoing calls

Resolved! Conference call and other features

IP phones 7942 are rebooting after uploading SIP firmware

CME-GUI:Unable to Configure ephones Past max-ephone Count

Resolved! CUCM Hard Drive Upgrade

Resolved! Change from 4 to 10 digit dialing

Resolved! Unity 7 Server Replacement

Unity 4 backup voicemails

Headset & handset use for IP phone

remote destination profile bulk creation

Triggering "Park" SoftKey via SIP Message on Cisco Phone

Where can I find an example of the CDR file output from CUBE?

"Integrating LDAP Directory with Azure on 840 Phone"

840 Wireless IP Phone jnteroperability with third-party access points

Hunt Pilot functionality

Cisco 7821 phone not registering on CME 14.1

Trying to SSH to 79XX phones

CME Directory Issue – Stuck on "Loading"

Enable midcall signaling in CUCM n have CUCM IP in 200 SDP OK in c