Dial plan issue

[shabali52]

We use 0 dial out and ever since we have migrated to sip trunk we get full e.164 DID on all inbound calls. Which means we receive +1<10 digits>

Problem we are having is on call back so if we have a missed call, we need to do edit dial and get rid of + and populate 0 to complete the call,is there a way around this so we can directly dial the number from missed calls?

[Jaime Valencia]

You always need to mention what you're working with, and not just what you want to achieve.

CUCM?? CME?? version??

First thought, would be to just configure a translation rule to do that, as you get all inbound calls in the same format.

[shabali52]

This is a CUCM version 11.0.1

[Suresh Hudda]

OR, you can configure translation pattern to do that in cucm, so outgoing call hit first at translation pattern and then after manipulation, it should go to route patter.

Suresh