05-26-2013 01:48 AM - edited 03-16-2019 05:30 PM
Hi
I am using CME router 2921.I have 2 FXO card (4 ports) and 8 PSTN lines are connected to my router. how to configure one line direct manager phone.
router running configuration example..
ephone-dn 45
number 267
description GM
name GM-Guest
call-forward busy 999
call-forward noan 999 timeout 15
trunk group fxo
voice-class cause-code 1
hunt-scheme longest-idle
voice-port 0/0/0
trunk-group FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
input gain 14
timeouts initial 0
timeouts interdigit 2
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 3
connection plar 888
caller-id enable
!
voice-port 0/0/1
trunk-group FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
input gain 14
timeouts initial 0
timeouts interdigit 2
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 3
connection plar 888
caller-id enable
!
voice-port 0/0/2
trunk-group FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
input gain 14
timeouts initial 0
timeouts interdigit 2
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 3
connection plar 888
caller-id enable
!
voice-port 0/0/3
trunk-group FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
input gain 14
timeouts initial 0
timeouts interdigit 2
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 3
connection plar 888
caller-id enable
!
voice-port 0/1/0
trunk-group FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
input gain 14
timeouts initial 0
timeouts interdigit 2
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 3
connection plar 888
caller-id enable
!
voice-port 0/1/1
trunk-group FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
input gain 14
timeouts initial 0
timeouts interdigit 2
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 3
connection plar 888
caller-id enable
!
voice-port 0/1/2
trunk-group FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
input gain 14
timeouts initial 0
timeouts interdigit 2
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 3
connection plar 888
caller-id enable
!
voice-port 0/1/3
trunk-group FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
input gain 14
timeouts initial 0
timeouts interdigit 2
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 3
connection plar 888
caller-id enable
dial-peer cor custom
name internal
name local
name national
name mobile
name international
!
!
dial-peer cor list internal
member internal
!
dial-peer cor list local
member local
!
dial-peer cor list national
member national
!
dial-peer cor list mobile
member mobile
!
dial-peer cor list international
member international
!
dial-peer cor list Restricted
member internal
!
dial-peer cor list LocalCalls
member internal
member local
!
dial-peer cor list LongDistance
member internal
member local
member national
member mobile
!
dial-peer cor list International
member internal
member local
member national
member mobile
member international
dial-peer voice 1 pots
trunkgroup FXO
corlist outgoing local
destination-pattern 9[19]..
forward-digits 3
!
dial-peer voice 2 pots
trunkgroup FXO
corlist outgoing local
destination-pattern 9[2-8][0-9][1-9]....
forward-digits 7
!
dial-peer voice 3 pots
trunkgroup FXO
corlist outgoing mobile
destination-pattern 905[056].......
prefix 05
!
dial-peer voice 4 pots
trunkgroup FXO
corlist outgoing national
destination-pattern 90[234679].......
prefix 0
!
dial-peer voice 5 pots
trunkgroup FXO
corlist outgoing international
destination-pattern 900T
prefix 00
!
dial-peer voice 6 pots
trunkgroup FXO
corlist outgoing local
destination-pattern 9600T
prefix 600
!
dial-peer voice 7 pots
trunkgroup FXO
corlist outgoing local
destination-pattern 9800T
prefix 800
05-26-2013 04:54 AM
Hi,
under voice-port 0/x/x (direct line you want)
connection plar xxx (GM dn number)
regards
Marwan
05-27-2013 12:22 AM
Thanks dear....
05-26-2013 09:27 AM
Hi Muhan,
You need to use Connection Plar. For example, when a call comes in on this line it is forwarded to 1001.
voice-port 2/1/0
connection plar opx 1001
Please remember to rate useful posts clicking on the stars below.
Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo.
___________________________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie
05-27-2013 12:24 AM
My problem solved.......thankyou my friend...
05-27-2013 04:57 AM
Why such a low rating givem to a 100% correct answer above?
That must never be done, as it is nothing less than offensive.
I've rated Leo's post again to partially compensate.
05-27-2013 05:22 AM
Thanks Paolo
Please remember to rate useful posts clicking on the stars below.
Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo.
___________________________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie
05-27-2013 05:24 AM
I make 1st correct answer !!!!
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: