01-12-2014 07:42 PM - edited 03-16-2019 09:12 PM
Hi guys,
I have a trouble with my CME, with FOX card, I've configured custome-cptone on voice-port FXO, but when I disconect call from PSTN, the call is not disconnected in my softphone.
PSTN --------------------- CME ------------------------- (plar) 8010
I've used CoolEditPro and Wireshark to measure the frequence and cadence, but it doesn't work.
01-12-2014 11:39 PM
01-13-2014 12:23 AM
thank you for your answer,
I've tried your suggestion, but it still not work,
have U any idea else, when I end call on my cell phone, the call in my softphone is still ringing. Then I call again, I have busy tone.
01-13-2014 12:37 AM
What codec is your CIPC using number one and number 2 please compare the following CIPC settings:
Remember as well that the CIPC makes use of the data VLAN.
Play around with the following codec settings and see if it makes a difference?
01-13-2014 12:50 AM
I don think my issue is codec or VLAN, and I dont use CUCM to register the phone, all my phone register on Router (CME).
01-13-2014 12:43 AM
Hi,
What is that FOX card? Are you referring to FXO card? If so this document might assist you in troubleshooting your problem.
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml
Please rate replies and mark question as "answered" if applicable.
01-13-2014 12:53 AM
hi,
I used this document to configure my FOX card, but it not work correctly, as I description.
01-13-2014 01:01 AM
Have you tried setting up the CPTONE to the country you are in?
Please rate replies and mark question as "answered" if applicable.
01-13-2014 01:43 AM
yes, i've tried configure, CPTONE but, my country "VIETNAM" is no defined in Cisco IOS , so I use CoolEditPro and Wireshark to mesure the parameter of Frequence and Candence of Custome-Cptone.
But, it stil not work.
01-13-2014 01:56 AM
Check them with your ISP what they get on their side and what they expect from you making Intl calls.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: