I need help to find out if it's possible to configure a displayed number eg 5555-551766 (this is a DID configure with num-exp) for outgoing call.
When users make external calls the displayed number is 5555-551700 and when customer wants call back our agents they can use the 5555-551766 number.
I'm trying to fix in 'Calling Party Transformations' in route pattern configuration but it wasn't works.
I put this in the 'Route Patterns' wasn't works.
Next I put this in the 'Directory Number' but still wasn't works.
The version of CUCM is 126.96.36.19900-14
I hope you can help me!
Solved! Go to Solution.
Check dial-peer 10 on your GW. Does it have a translation ?
Incoming Leg, the ANI is correct. Once the outgoing leg is created, the ANI is being changed. Attach your router config is possible.
This is my configuration:
R1#show run | section dial-peer voice 31 voip
dial-peer voice 31 voip
translation-profile outgoing salida
session protocol sipv2
session target ipv4:x.x.x.x
voice-class sip dtmf-relay force rtp-nte
no voice-class sip outbound-proxy
... didn't function