Does CME support SIP endpoints?

[MARK HOLLOWAY]

I'm guessing the answer is NO, that CME only supports SIP trunking. Can someone tell me otherwise?

[Majdi Harb · Accepted solution]

with Cisco Unified Communications Manager Express 4.1 there is SIP support for 7906G, 7911G, 7941G, 7961G, 7970G, and 7971G-GE ip phones.

see http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_qanda_item0900aecd805e69cf.shtml

under Cisco Unified Communications Manager Express 4.1

HTH

please rate helpful posts

Majdi

[Chris Deren]

Starting with CME 3.4 Cisco started supporting SIP enpoints, initially only on 7960/40/12/05 and has evolved since.

For latest supported SIP firmware and phones check out:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_installation_guide09186a00807aae21.html

HTH,

Chris

[paolo bevilacqua]

Actually, few more types:

ccme(config)#voice register pool 22

ccme(config-register-pool)#type ?

3951 Cisco SIP Phone 3951

7905 Cisco SIP Phone 7905

7911 Cisco SIP Phone 7911

7912 Cisco SIP Phone 7912

7940 Cisco SIP Phone 7940

7941 Cisco SIP Phone 7941

7941GE Cisco SIP Phone 7941GE

7960 Cisco SIP Phone 7960

7961 Cisco SIP Phone 7961

7961GE Cisco SIP Phone 7961GE

7970 Cisco SIP Phone 7970

7971 Cisco SIP Phone 7971

ATA Cisco SIP Phone ATA

P100 PingTel Xpressa 100

P600 Polycom SoundPoint 600

Also, most third-party phones are know to work, although cisco doesn't officially support them yet.

Hope this helps, please rate post if it does!

[MARK HOLLOWAY]

Thanks to everyone for answering my question. This is great news!