Dual Line ephone-dn roll over to Voicemail if both in use

[seanpatrickanderson]

Hello,

I was wondering if it is possible for someone with an ephone-dn set as dual line to have a third call roll over to vmail if both are in use?

Any help is appreciated!

Thank you

[Chris Deren]

Sure, that would be the defaul behavior if you have voicemail configured.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmevmail.html#wp1031671

HTH,

Chris

[acampbell]

Sean,

try putting hunt stop channel uner the ephone-dn

!

ephone-dn  2  dual-line

number 5002

pickup-group 1

call-forward busy 5990

call-forward noan 5990 timeout 15

huntstop channel

!

!

Regards

Alex

[seanpatrickanderson]

Hello,

I do have voicemail configured and I do have huntstop on.

I also have it set to go to my vmail extension in the CFNA. 

[Chris Deren]

Sean,

So what are you hearing on the 3rd call?

Chris

[seanpatrickanderson]

3rd call is a busy signal

[Chris Deren]

Can you post your full config?

What happens when you press the Messages button?

Chris

[seanpatrickanderson]

Right now I can't post the full config, but I will try to later.

When you press the messages button it all works as it should.