GDM MWI across CUCME sites

[dkilpatrick1]

I've got a tricky problem which is a little difficult to solve.

The setup:

 SITE 1                          SITE 2

 ------                          ------

  C2821    ----    WAN    ----    C2821

CUCME 8.6                       CUCME 8.6

CUE 7.0.5

Site 1 is running CUCME8.6 on a 2821, plus AIM-CUE for VoiceMail.

Site 2 is running CUCME8.6 on a 2821.

SIP trunk between both sites.

There are 4 extensions at each site (with mailboxes), and there is a GDM setup for each site.

I am having difficulty finding a suitable configuration to enable MWI to function for the GDM at site 2.

If I use unsolicited SIP MWI notification, only one gateway IP address can be set in CUE (for either Site 1, or Site 2) for unsolicited MWI delivery.

If I use SIP subscribe MWI notification, both sites can subscribe successfully to CUE to receive MWI for user mailboxes, however when I try to subscribe the GDM I receive a SIP404 error message (presumably because there is no "user" for the GDM, only a group with associated extension).

Does anyone see a possible way for the GDM extension at site 2 to receive MWI successfully?

Appreciate any suggestions and thoughts.

[Jitender Bhandari · Accepted solution]

Hi,

see if below helps

http://mickvaites.com/2009/06/installing-two-site-cme-and-a-single-cue/

(Rate if it helps)

JB

[dkilpatrick1]

Thanks .. that solution worked perfectly.

[Jitender Bhandari]

Happy to help,

thanks for updating the post.

JB