cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
783
Views
9
Helpful
5
Replies

Group Call Pickup

clark white
Explorer
Explorer

Hi,

2 No's group call-pickup, pickup each other calls though they are not  associated to each other groups, why ????

Thanks

1 Accepted Solution

Accepted Solutions

Hi,

what is your callmanager version ? if you need to configure GPickup or OPickup you need to configure directed Pickup group

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmfeat/fscpickg.html#wp1124310

Anas

View solution in original post

5 Replies 5

shiblyibrahim
Participant
Participant

Hey Clark,

Can you ellaborate your issue please

Thanks

Shibly

Please rate the post Shibly Ibrahim

Hi

Sorry i misunderstand call pick-up, please correct me if the below thought are correct.

Group call pickup: Enables users to pick up incoming calls destined to DNs on

different pickup groups. Users press the GPickup softkey and dial the appropriate

group number for the destination call-pickup group

Group call pickup means user in other group dials the appropriate DN number and picksup the call for that group

Other group call pickup: Enables users to pick up incoming calls in a group that is

associated with their own group. This type of call pickup is sometimes referred to as

pickup chaining, and it is covered in the next subtopic

Other group call pickup means users no need to dial the DN number for the other group if the other group is associated with the current group.

Hi Clark,

you are correct. users should use pickup softkey for the same group and Gpickup for other groups.

please make sure that there is no overlap between pickup group numbers and internal extension.

HTH

Anas

please rate if it is helpful

aabueideh wrote:

Hi Clark,

you are correct. users should use pickup softkey for the same group and Gpickup for other groups.

please make sure that there is no overlap between pickup group numbers and internal extension.

HTH

Anas

please rate if it is helpful

Dear Anas,

There are three types of Group: Call pickup,, Group Call pickup,,other group call pickup

I am saying about other group call pickup feature, for example if there are 2 groups group A and Group B and , if Group A is assoiciated with group B and also Group B is associated with Group A , then without dialing the directory number both groups can pickup each others call by pressing the pickup softkey.

Thanks

Hi,

what is your callmanager version ? if you need to configure GPickup or OPickup you need to configure directed Pickup group

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmfeat/fscpickg.html#wp1124310

Anas

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers