02-09-2016 12:26 AM - edited 03-17-2019 05:48 AM
Hi,
Is there any option in Voice gateway to check the SRST last fall back time?
Regards
Selva
02-09-2016 02:41 AM
IMO, gateway doesn't go into SRST mode ever. That is phones who lost connectivity with CUCM and go into SRST mode to register with gateway, hence I doubt you will get what you are looking for.
- Vivek
02-09-2016 02:45 AM
Due to Connectivity issue the Phone registered into Gateway. after the connectivity issue is resolved phone registered back into CUCM.
My Question is Is there any way to find when was the last fall back mode was active? after the phone was registered into CUCM.
02-09-2016 03:00 AM
As I said before, gateway doesn't go into SRST, it is phone who triggers registration with gateway during WAN outage, hence I see the only way to get the logs of phone registration from gateway and check the registration time stamp.
- Vivek
02-09-2016 05:06 AM
Hi Selva,
If you have enable buffer login on the SRST gateway and you can simply do "sh loggin" and you should see the timelines that the phone registered and unregistered on the SRST gateway.
example is shown below..
Log Buffer (8192 bytes):
10.126.111.249 Socket:33 DeviceType:Phone has unregistered normally.
Dec 4 11:42:00: %IPPHONE-6-REGISTER_NEW: ephone-41:SEP5C5015A9E5C9 IP:10.126.111.249 Socket:33 DeviceType:Phone has registered.
Dec 4 11:44:34: %IPPHONE-6-REGISTER_NEW: ephone-42:SEP5C5015A9DDBB IP:10.126.111.248 Socket:50 DeviceType:Phone has registered.
Dec 4 11:45:07: %IPPHONE-6-UNREGISTER_NORMAL: ephone-41:SEP5C5015A9E5C9 IP:10.126.111.249 Socket:33 DeviceType:Phone has unregistered normally.
Feb 2 12:44:16: %IPPHONE-6-UNREGISTER_NORMAL: ephone-41:SEP5C5015A9E5C9 IP:10.126.111.249 Socket:33 DeviceType:Phone has unregistered normally.
03-26-2022 12:54 AM
Hello Selva,
If you are using sip SRST you can find the time by the below command:-
sh voice register pool 1
you will find the time in the last of Output as the below:-
Last register request time: time (timezone) date
Last unregister request time : time (timezone) date
Register success time : time (timezone) date
Unregister success time : time (timezone) date
if you found this answer help you , please rate it
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide