04-24-2016 01:01 AM - edited 03-17-2019 06:41 AM
Hi,
Can you please inform that how can i configure conference setup in our Call Manager Express 10.5
We have SCCP & SIP phones and required conference setup
Waiting for your earliest replies will be highly appreciated
Thank you
Sajid
04-24-2016 03:19 AM
Hi Sajid,
Just you need to configure hw conference profile and mention it under telephony-service.
You may refer below link for detailed & tested config.
https://supportforums.cisco.com/discussion/12748366/cme-conference-does-not-works
Suresh
04-24-2016 10:49 AM
Have you reviewed the CME configuration guide which has all that info??
If not, that should have been your first step
12-31-2020 07:04 AM
Thanks, Jamie! You've helped my coworkers and me so much over the years.
04-24-2016 06:22 PM
You need to make sure one thing that you have enough DSP(PVDM) to configure conference or use HW resources from GW.
Rest you can follow doc shared by Java which is very good and explain in detailed.
Br,
nadeem
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide