09-12-2019 03:43 AM
Hi all,
Recently we have purchased 8831 conference phone. But in our CUCM default ad hoc conference limit is 4 . If i change the ad hoc range to 6 it will effect for all the connected phones.
Now, my request is we need to configure maximum or 6 conference call in 8831 phone only not for all. If its possible. please provide the solution on this...?
Solved! Go to Solution.
09-12-2019 05:40 AM - edited 09-12-2019 05:44 AM
Hi there,
This is a Global setting that will be applied to all phones. There is no way to set this for the 8831 only;
Both Ad Hoc and MeetMe conferences have a configurable setting that limits the number of participants (Software Conference Bridge);
Clusterwide Parameters (Service)
Maximum Ad Hoc Conference = 4 (default)
Maximum MeetMe Conference Unicast = 4 (default)
The default number of Maximum Adhoc Participants (per Conference) is set at 4.
To increase the Maximum number of Adhoc participants
Go to:
Service Parameters Configuration >Clusterwide Parameters (Service)>Maximum Adhoc Conference
Cheers!
Rob
09-12-2019 05:40 AM - edited 09-12-2019 05:44 AM
Hi there,
This is a Global setting that will be applied to all phones. There is no way to set this for the 8831 only;
Both Ad Hoc and MeetMe conferences have a configurable setting that limits the number of participants (Software Conference Bridge);
Clusterwide Parameters (Service)
Maximum Ad Hoc Conference = 4 (default)
Maximum MeetMe Conference Unicast = 4 (default)
The default number of Maximum Adhoc Participants (per Conference) is set at 4.
To increase the Maximum number of Adhoc participants
Go to:
Service Parameters Configuration >Clusterwide Parameters (Service)>Maximum Adhoc Conference
Cheers!
Rob
09-13-2019 02:30 AM
Mr.Rob...Thanks For your reply....If any alternate way is there for increase 8831 phone conference limit....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide