how to disable voice-port 0/0/0 and others

[jacob6000]

I have a 2801 router that used to run CCM. It no longer requires any voices services and the voice service is now outsourced. How do I remove these voice ports:

voice-port 0/0/0

!

voice-port 0/0/1

caller-id enable

!

voice-port 0/0/2

caller-id enable

!

voice-port 0/0/3

caller-id enable

!

voice-port 0/1/0

caller-id enable

!

voice-port 0/1/1

caller-id enable

!

voice-port 0/1/2

caller-id enable

!

voice-port 0/1/3

Thank you,

[Dennis Mink · Accepted solution]

You can admin down them (doing a shut), but to remove them fully, remove the cards  (assuming these are 4FXS or FXO ports). also you might want to remove the DSP modules in the router.

=============================
Please remember to rate useful posts, by clicking on the stars below.

=============================

[paolo bevilacqua]

Why a 100% correct answer, made with the will to help had been rated just a "3". I've rated it again to partially compensate.