09-21-2021 03:18 AM
hi all
i would like to forward any internal call come to my ip phone (8845) to 3 mobile number after 10 sec with no answer.
appreciate your support
09-21-2021 04:24 AM
USE SNR
Single profile with three remote destinations, as your 3 mobile numbers. all three number will ring.
09-21-2021 09:01 AM
As @Nithin Eluvathingal said, Single Number Reach will do exactly what you are asking. Here is a link to a configuration example for that feature:
Single Number Reach Feature for Cisco Unified Call Manager
Maren
09-21-2021 10:33 AM
09-21-2021 09:12 PM
First thing SNR is not a call forwarding. Understand the concept of SNR by reading Guides.
Did you checked the gateway? Does the remote destination call reaching your gateway ? Did you collected the debugs from gateway ?.
I assume that the call may be dropped by ISP dues to ANI. For a remote destination call calling information will be your Outside number and ISP may be rejecting this call. It could be the reason that you are not getting the call on your remote destinations configured.
Try below setting and see if it makes any change.
You can also refer the below blog.
https://defaultgateway.org/2021/08/11/change-ani-to-last-first-redirect-snr/
09-21-2021 10:54 AM
how to complete forwarding processing ?
below url explain the processing without show the final process
i need an internal call forward to 2 mobile phone after 10 second of ring
07-13-2022 06:33 AM
@Tarek If you are open to 3rd party solutions then your requirement can be fulfilled by a JTAPI based custom application.
For more details please write to info@parsec-tech.com
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide