06-12-2013 04:14 AM - edited 03-16-2019 05:49 PM
I am trying to install and configure a voice gateway but the sh isdn command does not seem to be enabled.
please see output of sh version on my router.
Solved! Go to Solution.
06-12-2013 04:40 AM
Hello Ayo,
Under the
controller E1 0/1/0
channel-group 15 timeslots 30
it should be as
controller E1 0/1/0
pri-group timeslots 1-31
Thanks,
Karthik
06-12-2013 04:26 AM
Ayo,
Have you configured your E1 on the gateway. Can you send you sh run
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
06-12-2013 04:34 AM
06-12-2013 04:40 AM
Hello Ayo,
Under the
controller E1 0/1/0
channel-group 15 timeslots 30
it should be as
controller E1 0/1/0
pri-group timeslots 1-31
Thanks,
Karthik
06-12-2013 04:44 AM
Hi Karthik,
thanks, I made the change and it worked like charm, I can no see the isdn commands.
thanks a lot.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide