cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
579
Views
0
Helpful
1
Replies

Issues with Corporate Directory in Cisco IP Communicator 7.0.3

kkung
Level 1
Level 1

I configure already configure over 50 Cisco IP Communicator and 50 users in a CUCM 7.0.2 using BAT.
The issue is that 3 of the 50 CIPC doens´t display the corporate directory, I already try re-installing the CIPC having the same issue.

Any idea of what´s happening?

1 Accepted Solution

Accepted Solutions

mkchandak
Level 1
Level 1

If this is happening only on a few specific machines, it could be a firewall on it. One thing to do would be to run problem reporting tool and check the trace files to see what is causing this to fail.

Sent from Cisco Technical Support iPad App

View solution in original post

1 Reply 1

mkchandak
Level 1
Level 1

If this is happening only on a few specific machines, it could be a firewall on it. One thing to do would be to run problem reporting tool and check the trace files to see what is causing this to fail.

Sent from Cisco Technical Support iPad App

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: