11-09-2012 12:40 PM - edited 03-16-2019 02:06 PM
Hi ,
Two of our employees are using Jabra headsets. They are currently working over the analog headset port, but they would like to use the digital converter cable the headset came with to improve performance. How should I turned it on to utilize the auxiliary port in behind the phone.
Head model: Jabra GN9300e
Phone model: 7942
Any help would be much appreciated.
Saima
Solved! Go to Solution.
11-09-2012 07:48 PM
saima.harris wrote:
Thanks for the quick response .
How can I configure it on CME
Saima
I just searched the forums for "CME Headset Enable" and found this document as the second link.
https://supportforums.cisco.com/docs/DOC-9928
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.
11-09-2012 12:50 PM
Hi Saima,
With the Cisco 7942, you would leverage the setting under
the product specific porting of the config via device>phone
and set Wireless Headset Hookswitch Control to Enabled
http://headsetplus.com/PDF/Jabra-EHS-guide.pdf
Cheers!
Rob
"And if I should fall behind
Wait for me" - Springsteen
11-09-2012 05:27 PM
Thanks for the quick response .
How can I configure it on CME
Saima
11-09-2012 07:48 PM
saima.harris wrote:
Thanks for the quick response .
How can I configure it on CME
Saima
I just searched the forums for "CME Headset Enable" and found this document as the second link.
https://supportforums.cisco.com/docs/DOC-9928
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.
12-12-2013 09:53 AM
I believe you can find your answer here:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide