cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
598
Views
0
Helpful
4
Replies
anupamjain
Beginner

Limit Max Calls on a PRI

Hi,

We are using 3825 and 3945. For one our PRIs, we want to  limit the no. of simultaneous calls to 10 (instead of 30). Searched  through the docs but couldnt find any parameter or dial-peer config to  do that. Is this achievable?

Regards

Anupam

4 REPLIES 4
ronpatel
Collaborator

Hi

If you have one dial peer POTS for that PRI you can configure  max-conn under that dial peer.

Or Else you can have fractional PRI configured. I believe fractional PRI is not supported but worth a try.

Regards

Ronak patel

Rate Helpful posts.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
Anas Abueideh
Engager

Hi,

do u have fractional PRI ?

Anas


Sent from Cisco Technical Support Android App

Jaime Valencia
Hall of Fame Cisco Employee

Do you mean inbound? outbound?? both??

And practional PRIs are supported, as long as you're using H323. We do not support them, if you want to use MGCP.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

As my colleagues already suggested simply configure the controller with number of channels you desire.

Chris

Content for Community-Ad

Spotlight Awards 2021