Limit Max Calls on a PRI

[anupamjain]

Hi,

We are using 3825 and 3945. For one our PRIs, we want to  limit the no. of simultaneous calls to 10 (instead of 30). Searched  through the docs but couldnt find any parameter or dial-peer config to  do that. Is this achievable?

Regards

Anupam

[ronpatel]

Hi

If you have one dial peer POTS for that PRI you can configure  max-conn under that dial peer.

Or Else you can have fractional PRI configured. I believe fractional PRI is not supported but worth a try.

Regards

Ronak patel

Rate Helpful posts.

[Anas Abueideh]

Hi,

do u have fractional PRI ?

Anas


Sent from Cisco Technical Support Android App

[Jaime Valencia]

Do you mean inbound? outbound?? both??

And practional PRIs are supported, as long as you're using H323. We do not support them, if you want to use MGCP.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

[Chris Deren]

As my colleagues already suggested simply configure the controller with number of channels you desire.

Chris