Moving IP Phone License from CUCM 6 to CUCM 9

[Ahmed Abdulla Mohammed Sallam]

Dear Friends

I wish you are fine ....... I need your help in CUCM ...... I have a customer that have CUCM 6 with 100 IP Phones (some of them 7911 , other 7945 others 7965) ....... He need to implemet CUCM 9 at another new site and he will take some of the IP Phones (20 form 7911; 20 from 7945 & 10 from 7965 ) and need them to work with the new CUCM 9

My question is: Can i move the IP Phone licenses which are already added to CUCM 6 to the new CUCM 9 so that those 50 IP Phones can work with the new CUCM 9 ???

If you have any document from Cisco, Kindly share it

Thanks in advance

[Chris Deren]

You will need to work with licensing@cisco.com, but my understand is that unless this is an upgrade you are not entitled to move licenses between clusters, you would need to purchase the migration license.

HTH,

Chris

[Aman Soi]

Hi Ahmed,

In addition to what Mr. Chris (+5) has said, you can refer this POST which talks about the migration of IP phones and CUCM version as well.

https://communities.cisco.com/thread/18836

Refer the PArt code MIG-CUCM-USR-A .

Do consult Cisco SE before quoting solution.

regds,

aman