Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
7504
Views
0
Helpful
25
Replies

Outgoing call take long time to etablish

Nirwana Support
Level 1
Level 1

‎07-26-2011 04:54 AM - edited ‎03-16-2019 06:07 AM

Hello,

I have a little problem with my UC540 (last os update ok). When I make an outgoing call, I type the prefix 0 for outgoing and make the others numbers but it take 12 to 15second to execute the call and get the first ring (in my phone outgoing planification all is ok, configured with SIP first) it's a very long delay. I make another test with 9 prefix for analogical outgoing, delay is correct it take 5-6 second to have the first ring. Someone have an idea ? Is there a configuration somewhere to change this delay ?

Regards

Labels:
0 Helpful
25 Replies 25

Nirwana Support
Level 1
Level 1
In response to acampbell

‎07-27-2011 12:21 AM

voice translation-rule 2222

!

!

voice translation-profile Atelier_Called_5

translate called 5

!

voice translation-profile CALLER_ID_TRANSLATION_PROFILE

translate calling 1111

!

voice translation-profile CallBlocking

translate called 2222

!

voice translation-profile Claude_Called_9

translate called 9

!

voice translation-profile GroupeNirwana-BG_Called_4

translate called 4

!

voice translation-profile Jorge_Called_10

translate called 10

!

voice translation-profile OUTGOING_TRANSLATION_PROFILE

translate called 1112

!

voice translation-profile PSTN_CallForwarding

translate redirect-target 410

translate redirect-called 410

!

voice translation-profile PSTN_Outgoing

translate calling 1111

translate called 1112

translate redirect-target 410

translate redirect-called 410

!

voice translation-profile SIP_Incoming

translate called 411

!

voice translation-profile SIP_Passthrough

translate called 412

!

voice translation-profile Sebastien_Called_11

translate called 11

!

voice translation-profile Standard-AA_Called_15

translate called 15

voice translation-profile XFER_TO_VM_PROFILE

translate redirect-called 2002

!

voice translation-profile nondialable

translate called 1000

!

!

voice-card 0

!

fax interface-type fax-mail

!

!

license udi pid UC540W-FXO-K9 sn FGL152025SY

archive

log config

  logging enable

  logging size 600

  hidekeys

username admin privilege 15 secret 5 secretcrypterpassword

username sebastien secret 5 secretcrypterpassword

!

!

ip tftp source-interface Loopback0

!

class-map match-all _class_Voice0

match ip dscp ef

class-map match-all _class_Voice1

match ip dscp cs3

!

!

policy-map Voice

class _class_Voice0

  set cos 6

class _class_Voice1

  set cos 3

!

!

!

crypto isakmp policy 1

encr 3des

authentication pre-share

group 2

!

crypto isakmp client configuration group EZVPN_GROUP_1

key mykey

dns 194.98.81.144

pool SDM_POOL_1

save-password

max-users 10

crypto isakmp profile sdm-ike-profile-1

   match identity group EZVPN_GROUP_1

   client authentication list Foxtrot_sdm_easyvpn_xauth_ml_1

   isakmp authorization list Foxtrot_sdm_easyvpn_group_ml_1

   client configuration address respond

   virtual-template 1

!

!

crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

!

crypto ipsec profile SDM_Profile1

set transform-set ESP-3DES-SHA

set isakmp-profile sdm-ike-profile-1

!

!

bridge irb

!

!

!

!

interface Loopback0

description $FW_INSIDE$

ip address 10.1.10.2 255.255.255.252

ip access-group 101 in

ip nat inside

ip virtual-reassembly in

!

interface FastEthernet0/0

description $ETH-WAN$

no ip address

ip virtual-reassembly in

load-interval 30

duplex auto

speed auto

pppoe enable group global

pppoe-client dial-pool-number 1

!

interface Integrated-Service-Engine0/0

description cue is initialized with default IMAP group

ip unnumbered Loopback0

ip nat inside

ip virtual-reassembly in

service-module ip address 10.1.10.1 255.255.255.252

service-module ip default-gateway 10.1.10.2

!

interface FastEthernet0/1/0

switchport voice vlan 100

macro description cisco-phone

spanning-tree portfast

!

interface FastEthernet0/1/1

switchport voice vlan 100

macro description cisco-phone

spanning-tree portfast

!

interface FastEthernet0/1/2

switchport voice vlan 100

macro description cisco-phone

spanning-tree portfast

!

interface FastEthernet0/1/3

switchport voice vlan 100

macro description cisco-phone

spanning-tree portfast

!

interface FastEthernet0/1/4

switchport voice vlan 100

macro description cisco-phone

spanning-tree portfast

!

interface FastEthernet0/1/5

switchport voice vlan 100

macro description cisco-phone

spanning-tree portfast

!

interface FastEthernet0/1/6

switchport voice vlan 100

macro description cisco-phone

spanning-tree portfast

!

interface FastEthernet0/1/7

switchport voice vlan 100

macro description cisco-phone

spanning-tree portfast

!

interface FastEthernet0/1/8

switchport mode trunk

macro description cisco-switch

!

interface Dot11Radio0/5/0

no ip address

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0

station-role root

antenna receive right

antenna transmit right

service-policy output Voice

!

interface Virtual-Template1 type tunnel

ip unnumbered BVI1

ip nat inside

ip virtual-reassembly in

tunnel mode ipsec ipv4

tunnel protection ipsec profile SDM_Profile1

!

interface Vlan1

no ip address

bridge-group 1

bridge-group 1 spanning-disabled

!

interface Vlan100

no ip address

bridge-group 100

bridge-group 100 spanning-disabled

!

interface Dialer0

description $FW_OUTSIDE$

ip address negotiated

ip access-group 104 in

ip mtu 1452

ip nat outside

ip inspect SDM_LOW out

ip virtual-reassembly in

encapsulation ppp

dialer pool 1

dialer-group 1

ppp authentication chap pap callin

ppp chap hostname myhostname

ppp chap password 7 mypassword

ppp pap sent-username myusername password 7 mypassword

ppp ipcp dns request

!

interface BVI1

description $FW_INSIDE$

ip address 192.168.10.1 255.255.255.0

ip access-group 102 in

ip nat inside

ip virtual-reassembly in

ip tcp adjust-mss 1412

!

interface BVI100

description $FW_INSIDE$

ip address 10.1.1.1 255.255.255.0

ip access-group 103 in

ip nat inside

ip virtual-reassembly in

ip tcp adjust-mss 1412

!

ip local pool SDM_POOL_1 192.168.10.50 192.168.10.60

ip forward-protocol nd

!

ip http server

ip http authentication local

ip http secure-server

ip http path flash:/gui

ip dns server

ip nat inside source route-map SDM_RMAP_1 interface Dialer0 overload

ip route 0.0.0.0 0.0.0.0 Dialer0

ip route 10.1.10.1 255.255.255.255 Integrated-Service-Engine0/0

If need more ask me. Thanks

0 Helpful

Brian Lavallee
Level 1
Level 1

‎07-26-2011 05:24 PM

Nobody mentioned it, but an easy way to determine if it's waiting for digit timeout is enter '#' at the end of your number. That will indicate the last digit has been entered.

Sent from Cisco Technical Support iPhone App

0 Helpful

Nirwana Support
Level 1
Level 1
In response to Brian Lavallee

‎07-27-2011 12:13 AM

Thanks but I try with the # at the end and it's the same, it take 15 second to etablish the connection

0 Helpful

Brian Lavallee
Level 1
Level 1
In response to Nirwana Support

‎07-27-2011 12:43 AM

Because there is no change when you add # to the end of the dialed digits, it's not the digit timeout.  The issue is with the dial-peers and/or translation-profiles.

Like it was mentioned above, the pattern appears to be matching two (2) of the dial-peers.

Brian

0 Helpful

Nirwana Support
Level 1
Level 1
In response to Brian Lavallee

‎07-27-2011 01:03 AM

Ok, but yesterday I make a cleaning in the dial-peers and I delete some unused dialpeers

I have these rules actually:

dial-peer voice 58 pots

trunkgroup ALL_FXO

corlist outgoing call-international

description **CCA*France*International Calls**

translation-profile outgoing OUTGOING_TRANSLATION_PROFILE

preference 5

destination-pattern 000T

forward-digits all

no sip-register

!

dial-peer voice 62 pots

trunkgroup ALL_FXO

corlist outgoing call-toll-free

description **CCA*France*Numero 08**

translation-profile outgoing OUTGOING_TRANSLATION_PROFILE

preference 5

destination-pattern 008........

forward-digits all

no sip-register

!

dial-peer voice 66 pots

trunkgroup ALL_FXO

corlist outgoing call-national-plus

description **CCA*France*Numero Free etc**

translation-profile outgoing OUTGOING_TRANSLATION_PROFILE

preference 5

destination-pattern 009........

forward-digits all

no sip-register

!

dial-peer voice 68 pots

trunkgroup ALL_FXO

corlist outgoing call-national

description **CCA*France*Value Added Services**

translation-profile outgoing OUTGOING_TRANSLATION_PROFILE

preference 5

destination-pattern 03...

forward-digits all

no sip-register

!

dial-peer voice 69 pots

trunkgroup ALL_FXO

corlist outgoing call-emergency

description **CCA*France*Police (17) Fire (18) Ambulance (19)**

translation-profile outgoing OUTGOING_TRANSLATION_PROFILE

preference 5

destination-pattern 01[578]

forward-digits all

no sip-register

!

dial-peer voice 70 pots

trunkgroup ALL_FXO

corlist outgoing call-emergency

description **CCA*France*Police (17) Fire (18) Ambulance (19)**

preference 5

destination-pattern 1[578]

forward-digits all

no sip-register

!

dial-peer voice 73 pots

trunkgroup ALL_FXO

corlist outgoing call-national-plus

description **CCA*France*Directory Enquiries**

translation-profile outgoing OUTGOING_TRANSLATION_PROFILE

preference 5

destination-pattern 0118...

forward-digits all

no sip-register

!

dial-peer voice 74 pots

trunkgroup ALL_FXO

corlist outgoing call-national

description **CCA*France*Network access codes**

translation-profile outgoing OUTGOING_TRANSLATION_PROFILE

preference 5

destination-pattern 010..

forward-digits all

no sip-register

!

dial-peer voice 1021 voip

corlist outgoing call-international

description **CCA*France*International Calls**

translation-profile outgoing PSTN_Outgoing

preference 1

destination-pattern 000T

session protocol sipv2

session target sip-server

voice-class codec 1

voice-class sip dtmf-relay force rtp-nte

dtmf-relay rtp-nte

ip qos dscp cs5 media

ip qos dscp cs4 signaling

no vad

!

dial-peer voice 1025 voip

corlist outgoing call-national

description **CCA*France*Mobile - Fixe**

translation-profile outgoing PSTN_Outgoing

preference 1

destination-pattern 00[1-7]........

session protocol sipv2

session target sip-server

voice-class codec 1

voice-class sip dtmf-relay force rtp-nte

dtmf-relay rtp-nte

ip qos dscp cs5 media

ip qos dscp cs4 signaling

no vad

!

dial-peer voice 1026 voip

corlist outgoing call-toll-free

description **CCA*France*Numero 08**

translation-profile outgoing PSTN_Outgoing

preference 1

destination-pattern 008........

session protocol sipv2

session target sip-server

voice-class codec 1

voice-class sip dtmf-relay force rtp-nte

dtmf-relay rtp-nte

ip qos dscp cs5 media

ip qos dscp cs4 signaling

no vad

!

dial-peer voice 1027 voip

corlist outgoing call-national

description **CCA*France*Network access codes**

translation-profile outgoing PSTN_Outgoing

preference 1

destination-pattern 010..

session protocol sipv2

session target sip-server

voice-class codec 1

voice-class sip dtmf-relay force rtp-nte

dtmf-relay rtp-nte

ip qos dscp cs5 media

ip qos dscp cs4 signaling

no vad

!

dial-peer voice 1028 voip

corlist outgoing call-national-plus

description **CCA*France*Directory Enquiries**

translation-profile outgoing PSTN_Outgoing

preference 1

destination-pattern 0118...

session protocol sipv2

session target sip-server

voice-class codec 1

voice-class sip dtmf-relay force rtp-nte

dtmf-relay rtp-nte

ip qos dscp cs5 media

ip qos dscp cs4 signaling

no vad

!

dial-peer voice 1031 voip

corlist outgoing call-national-plus

description **CCA*France*Numero Free etc**

translation-profile outgoing PSTN_Outgoing

preference 1

destination-pattern 009........

session protocol sipv2

session target sip-server

voice-class codec 1

voice-class sip dtmf-relay force rtp-nte

dtmf-relay rtp-nte

ip qos dscp cs5 media

ip qos dscp cs4 signaling

no vad

!

dial-peer voice 1035 voip

corlist outgoing call-emergency

description **CCA*France*Police (17) Fire (18) Ambulance (19)**

translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE

preference 1

destination-pattern 1[578]

session protocol sipv2

session target sip-server

voice-class codec 1

voice-class sip dtmf-relay force rtp-nte

dtmf-relay rtp-nte

ip qos dscp cs5 media

ip qos dscp cs4 signaling

no vad

!

dial-peer voice 1036 voip

corlist outgoing call-emergency

description **CCA*France*Police (17) Fire (18) Ambulance (19)**

translation-profile outgoing PSTN_Outgoing

preference 1

destination-pattern 01[578]

session protocol sipv2

session target sip-server

voice-class codec 1

voice-class sip dtmf-relay force rtp-nte

dtmf-relay rtp-nte

ip qos dscp cs5 media

ip qos dscp cs4 signaling

no vad

!

dial-peer voice 1037 voip

corlist outgoing call-national

description **CCA*France*Value Added Services**

translation-profile outgoing PSTN_Outgoing

preference 1

destination-pattern 03...

session protocol sipv2

session target sip-server

voice-class codec 1

voice-class sip dtmf-relay force rtp-nte

dtmf-relay rtp-nte

ip qos dscp cs5 media

ip qos dscp cs4 signaling

no vad

!

0 Helpful

Brian Lavallee
Level 1
Level 1
In response to Nirwana Support

‎07-27-2011 01:21 AM

Try building a dial-peer to "eaxctly match" a test number. 

Then try dialing that number.

The dial-peer with the closest match is used.

If you still have delay in the call setup, try dropping the trunkgroup and specify an interface.

I actually suggest you manually try each interface.

--

dial-peer voice XXX pots

trunkgroup ALL_FXO

corlist outgoing FOOBAR

description SOME SPECIFIC NUMBER

preference 1

destination-pattern 0012312312345

forward-digits all

no sip-register

!

0 Helpful

Nirwana Support
Level 1
Level 1
In response to Brian Lavallee

‎07-27-2011 02:54 AM

I make a new test with another prefix (8) and my cellphone number in the rules (i create a new rules)

like this: 8 0613133320

So the time to etablish the connection doesn't change

0 Helpful

Nirwana Support
Level 1
Level 1
In response to Brian Lavallee

‎07-28-2011 12:49 AM

I make another test, i remove all_fxo and add only the one i use, there is no change, the delay stay the same at the start, i notice this delay append only if i use the SIP for outgoing call, it works normally when I use my analogical line

0 Helpful

herve.prieur
Level 1
Level 1
In response to Nirwana Support

‎07-28-2011 12:55 AM

Hello,

Did you trace your SIP call ?

May be it's your Operator that has the delay.

Regards

0 Helpful

Nirwana Support
Level 1
Level 1
In response to herve.prieur

‎07-28-2011 01:02 AM

I already call the Operator, the support take the hand on my uc540 and verify all parameters for the SIP, for them all is ok there is no problem in he SIP connection

0 Helpful

Nirwana Support
Level 1
Level 1

‎07-28-2011 04:34 AM

Think ticket can be close, i have no solution for this, I reset completly my uc540 en reconfig it, all works fine, thanks for all to give me some solution to test

Best regards for all

0 Helpful
Customers Also Viewed These Support Documents