01-29-2016 10:22 PM - edited 03-17-2019 05:40 AM
Dears
I;m configure paing in our network, in paging group added 3 IP Phones. when press Speaker button and dial Paging DN, the Speaker on other phones showing active but no voice. can any one tell me whats problem.
Configuration is,
Ephone-dn 271
number 1111
name Sepco
paging
paging IP 239.0.1.20 port 2000
!
Ephone 1
Paging-dn 271 multicast
!
Ephone 2
Paging-dn 271 multicast
!
Ephone 3
Paging-dn 271 multicast
thankx.
01-30-2016 01:14 AM
Have you tried unicast paging, does that work fine. If yes, then the issue probably seems to be with the multicast, try checking MOH as well if that works fine or not. What is the IOS & CME version you are running there??
I hope you are following the below guide that contains good information on how to configure paging with some troubleshooting information:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmepage.html
Regards
Deepak
01-30-2016 02:44 AM
Router IOS version
Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.4(1)T4, RELEASE SOFTWARE (fc1)
CME Version
Version 10.0
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide