Paging

[Jawad Ahmad]

Dears 

I;m configure paing in our network, in paging group added 3 IP Phones. when press Speaker button and dial Paging DN, the Speaker on other phones showing active but no voice. can any one tell me whats problem.

Configuration is,

Ephone-dn 271

number 1111

name Sepco

paging 

paging IP 239.0.1.20 port 2000

!

Ephone 1

Paging-dn 271 multicast

!

Ephone 2

Paging-dn 271 multicast

!

Ephone 3

Paging-dn 271 multicast

thankx.

[Deepak Rawat]

Have you tried unicast paging, does that work fine. If yes, then the issue probably seems to be with the multicast, try checking MOH as well if that works fine or not. What is the IOS & CME version you are running there??

I hope you are following the below guide that contains good information on how to configure paging with some troubleshooting information:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmepage.html

Regards

Deepak

[Jawad Ahmad]

Router IOS version

Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.4(1)T4, RELEASE SOFTWARE (fc1)

CME Version

Version 10.0