Password settings for Calls

[hector_ramirez145]

Hi,
I have a 2921 router with CME and need help to set up a password when prompted want to make calls and enter the password if they can not make calls outside

[Vivek Batra]

Hi,

Please check Forced Authorization Codes (FAC);

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmefac.pdf

- Vivek

[Deepak Rawat]

You will need to configure FAC for this, take a look below:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmefac.html

Regards

Deepak

[hector_ramirez145]

to set the ephone-dn 1 have to enter the password to make calls this would be the right way?

voice lpcor enable
voice lpcor custom
!
group 10 Manager
group 11 LocalUser
!
!
voice lpcor policy Manager
accept LocalUsar fac
accept Manager fac
service fac
!
!
application
package auth
package param passwd 12345
param user-prompt flash:en_bacd_enter_dest.au
param passwd-prompt flash:en_welcome.au
param term-digit #
param abort-digit *
param max-digits 32
!
!
voice-port 0/0/0:1
lpcor incoming Manager
lpcor outgoing Manager
!
!
ephone-dn 1
number 2881
label Recibo - 2881
description Recibo - 2881
lpcor type local
lpcor incoming LocalUser
llpcor outgoing LocalUser
!
ephone-dn 2
number 2860
label 2860
call-forward busy 2000
call-forward noan 2000 timeout 18