09-02-2015 11:55 PM - edited 03-17-2019 04:12 AM
Hello community,
How could I identify if my placed call on FXO port is being answered by the called party or NOT, using debug command. Im using cisco router 1700 series with VIC2-2FXO card.
Thanks in advanced
Solved! Go to Solution.
09-06-2015 07:54 AM
Hi,
Connected means that call is established and media stream already started
09-03-2015 12:01 AM
Hi Saif,
You can analyse a call using "debug voice ccapi inout" as explained here
http://www.cisco.com/c/en/us/support/docs/voice/h323/14081-voip-debugcalls.html#voipccapi
Manish
- Do rate helpful posts -
09-05-2015 10:25 PM
Manish,
Thanks for your reply.
after the two gateways changes capabilities ( codec, vad, voip or fax ... etc ), and there will be an agreement from both sides. the call is connected. now ( connected ) means that the called part is ringing ( the calling party can hear ring tone, busy tone etc..) OR the call has been answered by the called party ?
Thanks
09-06-2015 07:54 AM
Hi,
Connected means that call is established and media stream already started
09-07-2015 10:47 PM
Thanks, thats correct
09-07-2015 10:46 PM
Thanks, the document solves my inquiries
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: