placed call being ansewred or NOT ??

[saif musa]

Hello community,

How could I identify if my placed call on FXO port is being answered by the called party or NOT, using debug command. Im using cisco router 1700 series with VIC2-2FXO card.
 

Thanks in advanced

[Manish Gogna]

Hi Saif,

You can analyse a call using "debug voice ccapi inout" as explained here

http://www.cisco.com/c/en/us/support/docs/voice/h323/14081-voip-debugcalls.html#voipccapi

Manish

- Do rate helpful posts -

[saif musa]

Manish,

Thanks for your reply.

after the two gateways changes capabilities ( codec, vad, voip or fax ... etc ), and there will be an agreement from both sides. the call is connected. now ( connected ) means that the called part is ringing ( the calling party can hear ring tone, busy tone etc..)  OR the call has been answered by the called party ?

Thanks
 

[Mohammed al Baqari · Accepted solution]

Hi,

Connected means that call is established and media stream already started 

[saif musa]

Thanks, thats correct

[saif musa]

Thanks, the document solves my inquiries