Dear Team,
Am facing an issue related to out going call over SIP Line.
I have SIP Trunk configured on our CUCM and the ISP Allowed range of SIP Direct line 7720 to 7730. [30 Extension]
When we place the call from the extension number which fall in that series the outgoing calls works fine to external number
the outgoing number is showing in SIP range.
However, if I call from the extension which starts the after the SIP range [7731], the outgoing calls are not getting placed and its failed with an error "cause=28" incomplete number. sure the call may disconnected as its out of range.
In order to facilitate the PSTN calls i have tried adding an translation rule like below, but the calls are not getting placed and the rule not matching it.
Kindly advise & guide me where i have mistaken in the configuration.
Thank you.
Requirement :- All the calls need to worked even the out of SIP range, the outgoing call number for out of SIP range extension should be 8597700
====Translation Rule added==== Attached current run config.
Existing works...
voice translation-rule 3
rule 1 /\(^77..\)/ /859\1/
Newly added to make it work- but not working as expected.
rule 2 /\(^78..\)/ /859\1/
rule 3 /^78../ /8597700/
rule 4 /^7800/ /8597700/
