04-02-2012 06:50 AM - edited 03-16-2019 10:25 AM
Hello,
i'd like to ask a quick question: is it possible to change the parameter "Detect Unified CM Connection Failure" which is in "Product Specific Configuration Layout" component of Phone Configuration Page globally in a way that i do not have to change it manually in every affected phone one by one? I went through all objects like Device Pool etc. in CUCM to see whether it can be done this way but couldn't find.
Thank you in advance
04-02-2012 07:12 AM
You can change it in "Common Phone Profile".
HTH,
Chris
04-03-2012 05:27 AM
I checked it also on Common Phone Profile as well and there is "product specific configuration layout" part indeed but this parameter is still missing...at least in my case i cannot see this.
Would it be possible then that the only option is BAT for this bulk export,modify and import transaction?
Thanks for response
04-03-2012 05:45 AM
What version of CUCM are you running? I see it on 8.5.
Chris
04-03-2012 05:48 AM
I have 8.0.3.22900-5 so it looks like that i'd have to upgrade CUCM to achieve that?
06-09-2020 11:11 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide