07-22-2020 04:51 AM
Hello!
I am newbie in Cisco collaborations. I want to configure my Cisco 3925 router as a PBX. I have installed PVDMv3-32 and have VIC2-4FXO card. Current ios version is 'c3900-universalk9-mz.SPA.152-4.M6a.bin'. so please suggest me recommended IOS and CME version for telephony services.
Note: Right now the FXO card has stuck with amber lights and properly showing in 'Show diag' but voice-port and telephony commands are not working.
Solved! Go to Solution.
07-22-2020 11:39 PM
UCk9 feature license is not enabled.you need to get the UC license to activate the voice commands.
you can go through the below link to understand more about the license and activating the evaluation license.
07-22-2020 04:53 AM - edited 07-22-2020 04:56 AM
Refer Below Link.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/33matrix.html
can we know what commands you tried ?
07-22-2020 05:42 AM
i am using
telephony-service
&
show voice port summary
commands but both are not working.
i also got to know my cme-srst license also not activated so is that doing trouble?
Following is the license status
Index 11 Feature: cme-srst
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
License Count: 0/0 (In-use/Violation)
License Priority: None
07-22-2020 05:58 AM - edited 07-22-2020 06:01 AM
can you post the sh license feature or check the status of uck9.
07-22-2020 11:27 PM
Router#sh license feature Feature name Enforcement Evaluation Subscription Enabled RightT oUse ipbasek9 no no no yes no securityk9 yes yes no no yes uck9 yes yes no no yes datak9 yes yes no no yes gatekeeper yes yes no no yes LI yes no no no no SSL_VPN yes yes no no yes ios-ips-update yes yes yes no yes SNASw yes yes no no yes hseck9 yes no no no no cme-srst yes yes no no yes WAAS_Express yes yes no no yes UCVideo yes yes no no yes
Here are the feature detail. If i have to buy a license please let me know the part# or if i only need to upgrade my IOS please acknowledge me along with complete IOS file name
Thanks!
07-22-2020 11:39 PM
UCk9 feature license is not enabled.you need to get the UC license to activate the voice commands.
you can go through the below link to understand more about the license and activating the evaluation license.
07-23-2020 12:24 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide