Relpace a Disk on CUCM 5.1

[habouzyad]

                   Hi ,

I had a problem with one Disk on my CUCM. Now the CUCM Work with One Disk.

I have jsut received a new Disk and i want to know if possible the answers for the following questions:

1- Can i Add the new Disk when a CUCM is active?

2- When a new disk is added, the all data on the First disk will be copied on the second Disk?

3- There is any other things that i have to do before adding the new disk?

Thanks in advance

Hicham

[dojoy]

Hi Hicham,

Could you share with us the full version of hardware you are using..?

e.g MCS 7825H3

[habouzyad]

Hi dojoy,

Please find the exact  version :

Active Version: 5.1.3.1000-12

Inactive Version: 

Administration Version: 2.0.0.1-1

MCS 7835-H2

HP  DG072ABAB3

HP 72G SAS 10K RPM HD

Active Version: 5.1.3.1000-12
Inactive Version: 
Administration Version: 2.0.0.1-1

Hardware Version :
MCS 7835-H2

Disk Version :

HP  DG072ABAB3
HP 72G SAS 10K RPM HD

Thanks in advance

[dojoy]

Hi Hicham,

Yes they are hot swapable.

.

Please reffer to page 2 of the below link

http://www.cisco.ag/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/product_data_sheet0900aecd80586038.pdf

If the hard driver is SAS they are hot swapable.

You can also reffer to the below link for more information.

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/product_data_sheet0900aecd80586038.html

Hope this answers your question and concerns.