Hi allI wanted to know what keys do I push to reset a cisco phone without going into CM. I know there is a way to do it but I've never done it before and I wanted to find out so that I can add that.
Is there a quicker way to access Fast Dials other then going through the Applications button and then selecting the Personal Fast Dials. Can I use one of my remaining programmable feature keys to directly access the Fast Dial list. To me the scroll...
I would like to debug a possible intermittent SIP issue with my SIP carrier. It needs to be output to my syslog server and I don't want it to be overly verbose and I want to limit the debug to one SIP peer only. That is I would like to see in syslo...
I currently have one line enabled only. I did not do the configuration for that line, and the person who did has left the company. How do I enable the second line? There is no power going to the second line (no lighting of light on phone for line 2) ...
Hi,I tried implementing internal transcoding on a Cisco 2431 IAD with no success. The setup is that from SBC inbound codec must be set to g729br8 first and then to PBX outbound codec must leave IAD at g711ulaw.Can you give any advice as how to achie...
Hey everyone,So we implemented UCXN 8.6 and now people are annoyed by the fact that when an outside caller who isn't recognized by the phone system leaves a voicemail, they are identified as Cisco Unity Connection Messaging System. Is it possible to ...
Hello,I have a couple of questions regarding CUCM cluster NodeId. This is the NodeId which is used in CDR file name (see http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/7_0_1/cdr-defs/cdrprocess.htm).Question 1:Is this the CTI ID from Web ...
Hi all,I tried to install VMTools on CUCM 8.6.2 as indicated at:http://docwiki.cisco.com/wiki/VMware_Tools#Which_method_to_useNow from ESXi GUI interface I can see VMTools status OK, but if I type "utils vmtools status" on cli the system say:admin:ut...
Hi,I have an issue with a customer , they are using CME FW Version 12.4.They want to implement a custom Feature access code so when someone dials *72 it should allow them to fwd all and to cancel fwding they need to press *73 .I've done this setup be...
Can someone help me out... Where do I go to look at the licenses available/in use? When buying additional phones (now 7942s) do we need to purchase licensing along with them?Also what about Unity licenses? Do the typical DLUs cover the phone/VM lic...
Hi All,We have recently upgraded Call Manager from 7.5.1 to 8.5.1 SU1. In 8.5.1 we have an option to add LDAP filter. My intention is to retrieve only the IP Phone users from AD as it is showing all the users in corporate directory who even doesnt ha...
Hi CommunityThe expansion module CKEM does not initialize on a 9971. The IP Phone is attached to a cube 4. It's running on CUCM 8.6. Module 1 is enabled for The CKEM 36 buttons. Phone Template is active with Firmware sip9971.9-2-3-27.The CKEM works f...
Hi,just trying to set a phone back to the factory default. In one doc, it said to not be connected to the network and another said to be connected to the network to be able to get the term65.default.loads file from tftp. Just wondering which is cor...
