10-11-2012 07:06 PM - edited 03-16-2019 01:38 PM
Running CUCM 6.1.4
Hopefully simple question. We have a customer who wants a DN to ring to an external number simultaneously when dialed. Any suggestions on how this can be accomplished?
Many thanx
10-11-2012 07:34 PM
Hi,
You can try with Remote Destinatom Profiles:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmfeat/fsmobmgr.html
This is the link for CUCM 8.5, we have to confirm if it's the same procedure for 6.x ...
For CUCM 6, seems that you can use Mobile Connect:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmfeat/fsmobmgr.html#wpxref99670
--
Jorge Armijo
Sent from Cisco Technical Support Android App
10-12-2012 05:30 PM
Found this article: http://www.tek-tips.com/viewthread.cfm?qid=1575474, so Jorge looks like you may be correct.
If Mobile Connect is the answer, anybody know the operational impact of enabling? Any (real) resource impact?
10-12-2012 11:34 PM
Look into that good link that Jorge Armijo sent already (rating +5).
In the section Interactions and Restrictions and System Requirements, there you can find the " impact".
Please remember to rate helpful responses and identify helpful or correct answers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide