hello Team,
I have Cisco 2901 Voice gateway with EHWIC-4ESG card installed..
Because 2901 Gig0/0 and 0/1 , both port are utilized. thus I am terminating ITSP SIP trunk on EHWIC-4ESG interface installed on the router.
Routing I have tested, as per below thread.. Hope my solution would work.. Kindly advise..
https://community.cisco.com/t5/ip-telephony-and-phones/cisco-2901-router-can-i-use-ethernet-switch-rather-then-ethernet/td-p/4047007/page/2
Best Regards
Anil Singh
