cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
890
Views
0
Helpful
5
Replies
Participant

SIP phone in SRST

Hello,

I have worked on configuration of SCCP phones in SRST.

Can anyone help me what are the different configs that are needed to make SIP phones work in SRST ?

Many Thanks

Regards,

Anil Sharma

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Rising star

Re: SIP phone in SRST

You need to configure SIP SRST, that's a completely separate configuration in IOS than SCCP SRST.

See more at this link, http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/guide/srst_call_handling.html#wp1052492

Please remember to rate all useful posts.

Sent from Cisco Technical Support iPhone App

Please rate posts (by clicking on Star) and/or
mark solutions as accepted, if applicable.

View solution in original post

5 REPLIES 5
Highlighted
Enthusiast

Re: SIP phone in SRST

CME as SRST? Or regular SRST?

Can you post your SCCP configuration?

Sent from Cisco Technical Support iPhone App

Highlighted
Participant

SIP phone in SRST

Thanks for your reply Robert. Its a regular SRST

call-manager-fallback

secondary-dialtone 0

max-conferences 4 gain -6

transfer-system full-consult

timeouts interdigit 4

timeouts ringing 90

ip source-address 10.216.32.4 port 2000

max-ephones 300

max-dn 500 dual-line

system message primary IN SRST

transfer-pattern .T

no huntstop

translation-profile incoming 4-DIGIT-SRST

call-forward pattern .T

moh music.wav

multicast moh 239.1.1.1 port 16384 route 10.216.32.4

time-zone 45

time-format 24

date-format dd-mm-yy

Highlighted
Rising star

Re: SIP phone in SRST

You need to configure SIP SRST, that's a completely separate configuration in IOS than SCCP SRST.

See more at this link, http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/guide/srst_call_handling.html#wp1052492

Please remember to rate all useful posts.

Sent from Cisco Technical Support iPhone App

Please rate posts (by clicking on Star) and/or
mark solutions as accepted, if applicable.

View solution in original post

Highlighted
Participant

SIP phone in SRST

Hello Roger,

Many Thanks .. One question

What does the command max-pool defines ?? I didnt clearly understood it

voice register global

max-dn 500

max-pool 165

Regards,

Anil Sharma

Highlighted
Rising star

Re: SIP phone in SRST

max-pool is equivalent to max-ephone. Aka maximum number of phones that can register to either of the SRST sub instances.

Please remember to rate all useful posts.

Sent from Cisco Technical Support iPhone App

Please rate posts (by clicking on Star) and/or
mark solutions as accepted, if applicable.
CreatePlease to create content