SRST License on 2911

[keanej]

Guys,

I purchased a 2911 with SRST and UC licenses. I notice that the UC license is fine - but the SRST license is in 'evalrighttouse' mode. The box came with two white cardboard envelopes - one contained a SRST site license and the other a 25 seat SRST license - but they just had the product code - and no PAK numbers on the paper.

Has anyone installed SRST licenses on a 2911 ?? Do I need to ? Here is the License status at the moment.

Index: 5        Feature: cme-srst                          Version: 1.0

        License Type: EvalRightToUse

        License State: Active, In Use

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 7  weeks 4  days

            Period used: 6  days 20 hours

            Transition date: Nov 22 2013 13:49:51

        License Count: 10/0  (In-use/Violation)

        License Priority: Low

        Store Index: 7

        Store Name: Built-In License Storage

Index: 11       Feature: uck9                              Version: 1.0

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

        Store Index: 1

        Store Name: Primary License Storage

Any Help appreciated

James

[Rejohn Cuares · Accepted solution]

The ISR-G2 comes with a 60-day evaluation license. After 60 days, the license changes to ?right to use?.
The customer is required to pay for the CME-SRST feature license which is valid for 12 years.
Prerequisites
? UCK9 license
? ISR-G2 already accepts UC CLIs

SUMMARY STEPS
1. show license detail cme-srst
2. configure terminal
3. license accept end user agreement
4. exit
5. show license detail cme-srst
6. write mem

DETAILED STEPS
Command or Action Purpose

Step 1 show license detail cme-srst
Example:
Router# show license detail cme-srst
Displays the available cme-srst license. EULA should be in NOT
ACCEPTED state.

Step 2 configure terminal
Example:
Router# configure terminal
Enters global configuration mode.

Step 3 license accept end user agreement
Example:
Router(config)# license accept end user
agreement
Configures a one-time acceptance of the EULA for cme-srst
license.
Accepts EULA by typing YES.

Step 4 exit
Example:
Router(config)# exit
Exits global configuration mode.

Step 5 show license detail cme-srst
Example:
Router# show license detail cme-srs
Displays the available cme-srst license. EULA should be in
ACCEPTED state.

Step 6 write mem
Example:
Router# write mem
Saves configuration.
Command or Action


Sent from Cisco Technical Support iPhone App

[keanej]

I believe I have already completed these steps

license accept end user agreement

license boot module c2900 technology-package uck9

and I also see

license accept end user agreement

on my configuration.

But I notice you say  -

comes with a 60-day evaluation license. After 60 days, the license changes to ?right to use?.

So I take it I dont have anything to worry about we have paid for a 25 seat license. I was worried that after the 60 days the license would appear as 'violated' but from what you are saying - I take it -   this is not the case.

Thanks for your help

James

[Aman Soi]

Hi James,

U can refer the link on Paul discussion.

https://supportforums.cisco.com/thread/2075698

regds,

aman

[Aman Soi · Accepted solution]

Hi James,

you can refer the link for detail.

https://supportforums.cisco.com/docs/DOC-26706

regds,

aman