SX20 Mic cable Length

[shaikhsuhail]

Hi,

What are the length of the cables of the mic which come along with SX20?

Is there a way to extend the cable length of the mic?

What will be lenght of the second mic CTS-QSC20-MIC?

Thanks,

Suhail.

[skilambi]

It is 7.5M

https://communities.cisco.com/docs/DOC-30323

Not sure on the extension cable

Srini

[Tiberie Kirijas]

Thanks Srini. Great info.

[admin11111]

Thanks Srini for the reply.

Can any one help me out in the extension cable? I have seen this part no CAB-MIC20-EXT=, will this work for SX20 mics?

Thanks,

[Enrico Conedera · Accepted solution]

The microphones provided with SX20 / C20 / MX200 / MX300 are identical.  The spare part number is CTS-QSC20-MIC=  

This mic can also be used with an EX90.

The length of the attached cable is 7.5 meters; it has a 3.5mm plug on the end with 4 conductors (TRRS)

There is an extension cable, as mentioned.  The part number is CAB-MIC20-EXT=   and it is 10 meters long.

[conmy]

Enrico,

Do you have any information regarding how many mic extension cables (CAB-MIC20-EXT=) can be daisy chained with the codecs?

[Enrico Conedera]

Hi Chris -

The extension cable was designed to support only one length of 10 meters.  Adding additional lengths may not work properly due to voltage drop.

If you need more length, I recommend using 22/4 shielded audio cable, which works fine up to 125 feet per a trusted partner.  You will need to source 4 conductor 3.5mm male and female connectors.

.enrico

[conmy]

Thanks so much.

[ddanosos1]

Hi Enrico,

Can you help if I want to use the mic input of SX10 so that I can use my wireless mic? Is this possible? Do I need a TRSS 3.5 input jack splitter where I can use the mic portion and input it to my wireless mic?

[Enrico Conedera]

Hello - the SX10 does not support the use of third party microphones or mic systems. They actually won't work at all. The SX10 is a low cost settop device that is not designed for audio visual integration.

The SX20 is Cisco's entry-level integrator codec, supporting the use of third party microphone systems.

regards/

/enrico

sent from my largish iPhone 6

[rdahl]

https://communities.cisco.com/thread/27697?tstart=0

**message from the moderator: please note that this URL is accessible only to Cisco Partners**

Thank you,

--

Rick Dahl

Cisco - CSE - Business Video

video or email:   rdahl@cisco.com

Phone:                 408.894.5112

Partner Communities is a great resource for reference, if you don't find, please ask!

https://communities.cisco.com/community/partner/collaboration/bizvideo

Call me on video – download Jabber for free https://www.ciscojabbervideo.com/rdahl@cisco.com//www.ciscojabbervideo.com/rdahl@cisco.com

Message was edited by: Kelli Glass

[rdahl]

https://communities.cisco.com/message/96525#96525

**please note that the URL is accessible only to Cisco partners**

What will be lenght of the second mic CTS-QSC20-MIC?

Thank you,

--

Rick Dahl

Cisco - CSE - Business Video

video or email:   rdahl@cisco.com

Phone:                 408.894.5112

Partner Communities is a great resource for reference, if you don't find, please ask!

https://communities.cisco.com/community/partner/collaboration/bizvideo

Call me on video – download Jabber for free https://www.ciscojabbervideo.com/rdahl@cisco.com//www.ciscojabbervideo.com/rdahl@cisco.com

[skilambi]

Enrico

Can the CAB-MIC20-EXT= also work with a SX10? I don't see why not since the same microphone also works with the SX10 but wanted to make sure in case there was a caveat with the SX10

[Enrico Conedera]

There shouldn't be any additional caveat on extending an SX10 microphone with CAB-MIC20-EXT=.  As usual, don't use more than one extension cable.

[skilambi]

Thank you

Thanks

Srini