02-22-2012 11:20 AM - edited 03-16-2019 09:43 AM
Hello,
Does anybody know if we can register the SX20 as a 3rd party SIP endpoint in older versions of CUCM (prior to 8.6)? Otherwise, I guess my options are upgrading to 8.6 or get a VCS.
Thanks,
Manuel
Solved! Go to Solution.
05-06-2014 05:46 AM
I need to know also the answer of this question
Does that need a Single Screen licence or Multi Screen?
But I remember that I have configured sx20 with cucm 8.6 without any need for TP single screen license as it consume some DLUs only
May be this lic is required starting cucm 9
05-06-2014 06:11 AM
The license rule needs to be followed even in 8. Yes it takes DLU because user licensing isn't enforced
With 9 there is only one license called TP licensing that's all you need no more hassles with single multi etc
Thanks
Srini
05-06-2014 06:32 AM
Hi Srini,
Thanks for your reply
So this one " LIC-TP-SGL-SRN " is now replaced with tp licensing ?
I found this license LIC-CTS-MAN-10= also available for 50 and 100 units
Please advise what is the tp PN and I think I should use 2 for two sx20 .. right ?
Thanks again
05-06-2014 06:46 AM
Yes single screen with 8.
No cts man is needed that's the old scheduling product, TMS is the replacement product
Thanks
Srini
05-06-2014 07:00 AM
sorry I got confused
Plz write the PN required for two sx20 with cucm 9
And If I install these 2 sx20 point to point, Do I need also this license
Thanks again Srini
05-06-2014 07:12 AM
Look under l-cucm-usr-LIC-add an inside that you will see the licensing
Yes for each unit you need to buy the license
Thanks
Srini
05-15-2014 12:04 AM
Hi,
for two sx20 with cucm 9.x you need:
Item Name | Description | Quantity |
R-UCL-UCM-LIC-K9 | Top Level SKU For 9.x/10.x User License - eDelivery | 1 |
LIC-TP-9X-ROOM | Telepresence Room Based Endpoint Single or Multi-Screen | 2 |
CUCM-VERS-9.X | CUCM Software Version 9.X | 1 |
UCM-PAK | UCM 9X/10X PAK | 1 |
Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide