Timezone in CUCM 10.5

[waqas sardar]

Dear Team,

I want to change the timezone in CUCM 10.5 but following commands are not working:

show timezone list 

show timezone 232

Please advise

[Alessandra_1607]

Hi Mohit,

I'm having problem installing the file ciscocm.dst-updater.2015g-el6-00.11.0.1.cop

There is any services that I should shut down for it?

The SDKList.txt file doesn't exist. Please re-run the tool with -Ddiscoveronly=true option to generate the list of SDKs.
[Capture]
[Capture] --------------------------------xxxxxxx---------------------------------
[Capture] Removing the IBM JTZU temp directory
OS execution complete
Executing Product component

[Mohit Grover]

Hi,

Which Call Manager version are you running?

++ Also check "Special Pre-Installation Instructions" & "Installation Instructions" in the read me file
>
Located here http://www.cisco.com/web/software/282074298/130428/dst-1101-2015g-cop-readme.pdf
>
It says "Before installing this DST COP file you must install ciscocm.RTMTTz-updater.2015g-el6-00.11.0.1.cop.sgn or be running a release that contains CSCuw64866" - DST/TZ data upgrade with 2015e - RTMT.

In the "Installation Instructions" I could see following
>
This package will install on the following System Versions: - 11.0.1.10000 - 10 or any higher version starting with 11.0.1.xxxx