Hi,
I have a UC520-16U-4FXO-K9, the integrated 4 fxo works 100% fine.
I have try to add another FXO card with 2 port. ( VIc card ) and I cant see the ports in the CLI.
note : the Led of the FXO are organge, I allready try to use another FXO card but same result.
Anyone knows why ?
here is the details of the show inv and sh diag
thanks guys :
sh ver
Version 12.4(11)XW
flash:uc500-advipservicesk9-mz.124-11.XW4
10 FastEthernet interfaces
2 terminal lines
4 Voice FXO interfaces ( should be 6 - 4FxO and 2 FxO )
4 Voice FXS interfaces
1 Voice MoH interface
1 cisco service engine(s)
UC520#show inv
NAME: "UC520-16U-4FXO-K9 Chassis", DESCR: "UC520-16U-4FXO-K9 Chassis"
PID: UC520-16U-4FXO-K9 , VID: V01, SN: FHK114215GT
==========
UC520#sh diag
Slot 0:
UC500 Mainboard 1FE, 8FE POE, Stacking FE, MOH, Port adapter
Port adapter is analyzed
Port adapter insertion time unknown
Hardware Crypto Engine Details:
The CHIP id is 0x10003
The SEC revision no is 0x1
EEPROM contents at hardware discovery:
PCB Serial Number : FOC11343WZB
Hardware Revision : 2.2
Top Assy. Part Number : 800-29314-01
Board Revision : C0
Deviation Number : 0
Fab Version : 02
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : AD
Hardware date code : 0
Chassis Serial Number : FHK114215GT
Chassis MAC Address : 001b.8fab.48a0
MAC Address block size : 32
CLEI Code : TBD0000000
Product (FRU) Number : UC520-16U-4FXO-K9
Part Number : 73-10819-02
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
FXO Voice IO Card:
EEPROM contents at hardware discovery:
Hardware Revision : 3.1
PCB Serial Number : FOC11416M8P
Part Number : 73-10820-03
Board Revision : D0
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Deviation Number : 0
Product (FRU) Number : UC520
Top Assy. Part Number : 800-28035-02
CLEI Code :
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
PVDM Slot 0:
32-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
Hardware Revision : 4.0
Part Number : 73-8539-05
Board Revision : B0
Deviation Number : 0
Fab Version : 04
PCB Serial Number : FOC11374HZF
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 00
Product (FRU) Number : PVDM2-32
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
VIC Slot 0:
3rd generation - FXS DID Voice daughter card (4 port)
Hardware Revision : 1.0
Top Assy. Part Number : 800-27474-02
Board Revision : D0
Deviation Number : 0
Fab Version : 01
PCB Serial Number :
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : VIC3-4FXS/DID
Version Identifier : V01
CLEI Code : TBD
Longitudinal Calibration : 01 10 10 A4 8E 10 10 76
64 10 10 7D 67 10 10 7A
A2
EEPROM format version 4
EEPROM contents (hex):
VIC Slot 1:
2nd generation - FXO Voice daughter card (4 port)
Hardware Revision : 5.0
Top Assy. Part Number : 800-21589-02
Board Revision : A1
Deviation Number : 0-0
Fab Version : 04
PCB Serial Number :
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : VIC2-4FXO
Version Identifier : V01
CLEI Code : CNUIAPRAAA
EEPROM format version 4
EEPROM contents (hex):
VIC Slot 2:
Unknown WAN daughter card
Unknown EEPROM ver 176
EEPROM format version 176
EEPROM contents (hex):
0x20: B0 80 FF FF FF FF FF FF 00 1E FF FF FF FF FF FF
0x30: 90 0A FF FF FF FF FF FF FF FF FF FF FF FF FF FF
VIC Slot 4:
One port MOH Voice Interface
Built-in 9 ports Ethernet Switch with ILP Support for 8 ports
Hardware: Marvell 88E6083 Chip Revision: 1
LTC4258 PoE controller#0:
IC version: 0x4 Firmware revision: 0x0 Silicon revision: 0x0
LTC4258 PoE controller#1:
IC version: 0x4 Firmware revision: 0x0 Silicon revision: 0x0
Onboard Service Engine: 0
Accepted Solutions
