Unable to Call International from the USA

[AM8112]

Hi everyone, 

Not sure what is the problem here. I feel liked I've tried every combo of config possible. We are able to call local and national, however, international fails. We have Comcast PRI and I called them and they told me we have international enabled, but couldn't give me anymore insight beyond that. 

Below is the International Dial Peer config:

dial-peer voice 60 pots
trunkgroup ALL_PSTN
description *** Outgoing North America International Dialing ***
destination-pattern 9011T
forward-digits 15

Interfaces Config:

interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
isdn supp-service name calling
isdn sending-complete
isdn outgoing display-ie
trunk-group ALL_PSTN
no cdp enable
!
interface Serial0/0/1:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
isdn sending-complete
isdn outgoing display-ie
trunk-group ALL_PSTN
no cdp enable

CUCM Config:

Route Pattern 9.011!#

Calling Party and Number Type is Cisco Call Manager for both 

Any help would be greatly appreciated! 

[Roger Kallberg]

A few questions.

• Do you see the call hit your voice gateway?
• If you do does it use the intended dial peer?
• How are you sending called and calling number to your service provider?
• If you debug the call what response are you seeing from the service provider?