Unity Cluster

[Ian Jones]

I'm deploying unity connection 8.6 as a cluster- do I need two SIP trunks in CUCM pointing at each server or can I use one trunk  with both Unity IP addresses?

[Rob Huffman · Accepted solution]

Hi Ian,

We run SCCP but it does look like 2 SIP Trunks are required

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/9x/integration/guide/cucm_sip/cucintcucmsip060.html#wp1132738

Cheers!

Rob

"Why do the best things always disappear " 

- The Band

[Chris Deren · Accepted solution]

You could do 1 trunk with 2 destination IP addresses, but I normally do 2 separate trunks and control the order via route groups.

HTH,

Chris