ā11-08-2013 07:34 AM - edited ā03-16-2019 08:18 PM
I'm deploying unity connection 8.6 as a cluster- do I need two SIP trunks in CUCM pointing at each server or can I use one trunk with both Unity IP addresses?
Solved! Go to Solution.
ā11-08-2013 07:40 AM
Hi Ian,
We run SCCP but it does look like 2 SIP Trunks are required
Cheers!
Rob
"Why do the best things always disappear "
- The Band
ā11-08-2013 07:59 AM
You could do 1 trunk with 2 destination IP addresses, but I normally do 2 separate trunks and control the order via route groups.
HTH,
Chris
ā11-08-2013 07:40 AM
Hi Ian,
We run SCCP but it does look like 2 SIP Trunks are required
Cheers!
Rob
"Why do the best things always disappear "
- The Band
ā11-08-2013 07:59 AM
You could do 1 trunk with 2 destination IP addresses, but I normally do 2 separate trunks and control the order via route groups.
HTH,
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide