03-07-2013 12:24 PM - edited 03-16-2019 04:08 PM
Hello,
We have a CUCM 8.5 running for more than 1 year withtout major issues.
In the last month, the following error occured two times.
When saving changed made on BLF Speed Dial (7900 phones with expansion modules, so, a lot of Speed Dial), it shows an error message that tells "Unmapped Exception Null", and all the Speed Dial configurations (that already exisists) are lost.
Made some research and found this document, that tells the browser version.
It states that IE 6 is supported (we're using IE6).
Did you saw this before?
Regards
Solved! Go to Solution.
03-07-2013 01:01 PM
Hi Victor,
It could be this bug perhaps;
CSCtn65309 - BLF Speed Dial Unmapped Exception
Symptom:
Unmapped Exception Null received when editing/saving BLF Speed Dials.
Conditions:
Select any devices BLF Speed Dial extension on the phone configuration page. Then highlight an
extension, right click with the mouse to Cut it, then right click to paste it into a different field
when being saved we get a "Unmapped Exception null"
Workaround:
Use Control-X and Control-V
Further Problem Description:
All versions of CUCM are affected. I personally tested 6.1.4, 7.1.3, 8.0.3, 8.5.1
Details
Status:
Fixed
Last Modified:
Nov 02,2012
8.6(1.99989.1),8.6(1.99986.1),8.6(1.97011.2)
8.6(1.95190.40),8.6(1.95050.1),8.6(1.95040.1)
8.6(1.95020.58),8.6(1.95020.1),8.6(1.10001.1)
8.6(1.10000.43),8.6(1.10000.1),8.6(0.99981.2)
8.6(0.98000.50),8.6(0.98000.16),8.6(0.95180.9)
1.0(0.98000.42)
Less
Product:
Cisco Unified Communications Manager (CallManager)
Platform:
Dependent
Severity:
3 - moderate
Cheers!
Rob
"What you don't have you don't need it now"
- U2
03-07-2013 01:01 PM
Hi Victor,
It could be this bug perhaps;
CSCtn65309 - BLF Speed Dial Unmapped Exception
Symptom:
Unmapped Exception Null received when editing/saving BLF Speed Dials.
Conditions:
Select any devices BLF Speed Dial extension on the phone configuration page. Then highlight an
extension, right click with the mouse to Cut it, then right click to paste it into a different field
when being saved we get a "Unmapped Exception null"
Workaround:
Use Control-X and Control-V
Further Problem Description:
All versions of CUCM are affected. I personally tested 6.1.4, 7.1.3, 8.0.3, 8.5.1
Details
Status:
Fixed
Last Modified:
Nov 02,2012
8.6(1.99989.1),8.6(1.99986.1),8.6(1.97011.2)
8.6(1.95190.40),8.6(1.95050.1),8.6(1.95040.1)
8.6(1.95020.58),8.6(1.95020.1),8.6(1.10001.1)
8.6(1.10000.43),8.6(1.10000.1),8.6(0.99981.2)
8.6(0.98000.50),8.6(0.98000.16),8.6(0.95180.9)
1.0(0.98000.42)
Less
Product:
Cisco Unified Communications Manager (CallManager)
Platform:
Dependent
Severity:
3 - moderate
Cheers!
Rob
"What you don't have you don't need it now"
- U2
03-07-2013 01:06 PM
I thought this was a bug but no one can beat the legend in tracking them down!
03-07-2013 01:10 PM
Hailey,
How does that saying go.........
"Legend in his own mind" ...hahahaha!
Thanks buddy! +5 right back at ya.
Cheers!
Huff
"What you don't have you don't need it now"
- U2
03-08-2013 03:51 AM
Thanks Rob!
I searched the Bug Tool Kit for "unmapped" or "exception" but this don't came to me.
Cheers!
03-08-2013 05:25 AM
Hi Victor,
You are most welcome my friend
I've been using the beta Bug Search Tool for most searches
these days and this is where the listed bug was identified;
BST
https://www.cisco.com/cisco/psn/bssprt/bss
Cheers!
Rob
"What you don't have you don't need it now"
- U2
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide