06-01-2016 10:31 PM - edited 03-17-2019 07:06 AM
Hi there,
Currently I'm planning to setup SIP trunk between VG310(analog phones connected) and a Non-Cisco SIP Server. I'm wondering do I need to purchase any license ? Thank you in advance.
Solved! Go to Solution.
06-02-2016 06:28 AM
Since you are connecting via SIP to non-Cisco PBX there is no licenses that need to be applied anywhere, unless your 3rd party solution requires SIP licensing as some do.
06-01-2016 11:41 PM
Hi Jerry,
What is the complete setup? If the VG310 is registered to CUCM then there is no license requirement for trunks on VG from cucm perspective.
HTH
Manish
06-03-2016 01:59 AM
Hi Manish,
I'm planning to connect analog phones to VG310 and then SIP Trunk from VG 310 to Avaya SIP Server and finally from SIP Server to Cisco 2900 Voice Gateway to PSTN via either E1 or FXO.
06-03-2016 02:10 AM
Hi Jerry,
From CUCM or VG310 perspective there are no license requirements for this setup.
Manish
06-06-2016 01:21 AM
Thanks, Manish.
12-20-2016 01:04 PM
Hi Jerry
were you able to do so? can you use sip trunk with this VG?
06-02-2016 06:28 AM
Since you are connecting via SIP to non-Cisco PBX there is no licenses that need to be applied anywhere, unless your 3rd party solution requires SIP licensing as some do.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide