01-19-2014 10:29 PM - edited 03-16-2019 09:19 PM
Do I need an external DSU if I am using VIC2-2BRI-NT/TE cards?
Solved! Go to Solution.
01-19-2014 11:49 PM
Hi Jacob,
I was just reading the link shared with you :
External DSU is required in both cases whether u configure it as User or Network .
regds,
aman
01-19-2014 10:57 PM
Hi Jacob,
As per the datasheet , it is configurable for S/T or U side.You can check the link
regds,
aman
01-19-2014 11:09 PM
Hi Aman,
Thanks for the quick reply. Can you just confirm that this configuration will be used in place of a DSU?
I'm still not super hip to all the voice lingo.
01-19-2014 11:49 PM
Hi Jacob,
I was just reading the link shared with you :
External DSU is required in both cases whether u configure it as User or Network .
regds,
aman
01-20-2014 12:32 AM
Thanks for the confirmation Aman. I guess I need to go get some DSUs for these.
08-20-2014 09:01 PM
Hi aman,
I am having the same issue as Jacob. In many product descriptions of the card, I find the following sentence:
(VIC2-2BRI-NT/TE) have the same capabilities as the S/T card, but can also be configured to provide a network termination (NT) interface with phantom power.
So if I could configure the card to provide network termination, why would I need an external DSU? What would be its purpose?
Regards,
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide