02-18-2015 12:08 PM - edited 03-17-2019 02:02 AM
For Call Manager version 10.5, Our publisher is on a VMWare server.
Our vmem usage stays at about 70% constant utilization since we upgraded to 10.5
That's a bit higher than it was when we were at version 8.6 on the same platform. Is this anything to be concerned about? Is there any benchmark or average % of virtual memory that a virtual server CM Publisher should run at?
Here are the main processes:
02-18-2015 08:46 PM
Hi Tracee,
This looks normal unless you see some sudden spikes or Low memory alerts being generated. You can verify any VM leakage using RTMT as described in the following link
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/managed_services/ManagedServices/cucm_health.html#wp1101225
You can also check the output of following commands for any core dumps or related errors
utils dignose test
utils core active list
HTH
Manish
04-24-2015 05:09 PM
Greetings Tracee,
I am coming across the same problem and was wondering if your issue has been resolved? If so what actions were taken?
I ran the diagnose test and all tests passed, i also checked and confirmed there's nothing listed under the utils core active list. I compared your processes to mine and the only difference i see on mine is that I have java processes at VMSize- 1221756. Below is my diagnose test output (I noticed the available disk space is less then 2GB's)
Starting diagnostic test(s)
===========================
test - disk_space : Passed (available: 1767 MB, used: 12389 MB)
skip - disk_files : This module must be run directly and off hours
test - service_manager : Passed
test - tomcat : Passed
test - tomcat_deadlocks : Passed
test - tomcat_keystore : Passed
test - tomcat_connectors : Passed
test - tomcat_threads : Passed
test - tomcat_memory : Passed
test - tomcat_sessions : Passed
skip - tomcat_heapdump : This module must be run directly and off hours
test - validate_network : Passed
test - raid : Passed
test - system_info : Passed (Collected system information in diagnostic log)
test - ntp_reachability : Passed
test - ntp_clock_drift : Passed
test - ntp_stratum : Passed
skip - sdl_fragmentation : This module must be run directly and off hours
skip - sdi_fragmentation : This module must be run directly and off hours
Diagnostics Completed
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide