Metro

Hi all, I was looking at the following configuration guide for ME3400E http://www.cisco.com/en/US/docs/switches/metro/me3400e/software/release/12.2_44_ey/configuration/guide/swintro.htmlAlmost all the features listed are present in 3850/3560x switche...

If a PE does not support RSVP-TE,it can still take advantage of the benifits provided by TE in the core by config LDP over RSVP on a Juniper M series router. I learn from the Cisco whitepaper "Deploying ganranteed-bandwidth service with MPLS " that...

I would like to know how the licensing works for ME-3600X and ME-3800X. For 3600X1. What is the base license for Cisco ME 3600X-24TS Ethernet Access Switch -ME-3600X-24TS-M?2. If I want to upgrade the license to Advanced Metro IP Services  using L-ME...

What does mean by input packets and output packets on a CEM interface. Which direction is the output. MPLS to SONET?? DEMA-M-NGN-PE-01#sh int cem 7/0/0CEM7/0/0 is up, line protocol is up   Hardware is Circuit Emulation Interface  MTU 1500 bytes, BW 1...

Hello everybody,I reviewed the ME-3600 datasheet and in this document no appear that this switch support PoE feature. There is any way that ME-3600 support this feature?.Regards

My ISP customer would like to deploy FTTH solution using rings as showed in the attachement made of ME-3400 or 4500-E depending on how many customer have to be connected to each area (less than 80 --> we go for ME 3400, more than 80 --> we go for 450...

I am trying to rate limit (both input and output) a port on an ME3400 to 1.5 Mb.  I have tried the old CAS commands: rate-limit input 1500000 256000 256000 conform-action transmit exceed-action drop rate-limit output 1500000 256000 256000 conform-act...

Hi, I have an issue with ME3600 running 15.3(1)S. I have a BDI used for CPEmanagement. cisco ME-3600X-24FS-M Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version15.3(1)S, RELEASE SOFTWARE (fc1) This is the BDI and VRF configuration: in...

Hello,what is the best practice for the configuration of L3VPN on Cisco ME3XXX ?Old Syntax:interface GigabitEthernet0/1switchport trunk allowed vlan none switchport mode trunk! service instance 2 ethernet  encapsulation dot1q 3  rewrite ingress tag p...

Hello,I'm currently working on hashing out the details regarding pseudowire types in order to up train some of my technicians.  I work in an environment where the majority of our circuits operate using MPLS and L2TP encapsulation for L2VPN circuits. ...

Dear all,We are running IOS15.3(1) in our ME3600Xs. In some cases we are using the following feature to avoid drops in ME3600X queues due to microbursts:    Egress default queue limit improvement and percent bandwidth support—QoS feature to increase ...

Hi,Ive been reading through documentation and posts in the forum about L2 tunneling EVC etc.. but some items are still confusing so if some people out there can shed some light would be great.Im using 7600 with ES+ cards and ME3400E, Aim is to setup ...