Network Access Control

Hi I am running 2 ACS servers on the SE platform running 4.0(1) Build 42. On one server everything works fine, but on the other server I get this:TCP Ports Opened49 opened2000-2003 opened1075 opened49 opened2000-2003 opened1075 openedUDP Ports Opene...

Dear I have low experiance with cisco ACSSo kindly i need help to add user to The ACS which has limited access to my network Switches ( As Show only not to change configuration )Also how to take backup for the ACS DatabaseThanks,

hi , Can anyone suggest to me any book about using ACS for pix firewalls?thanks

We have some AP1100 using 802.1x authentication with a ACS server, that is then looking up users on a windows domain, that is working fine.I would like to be able to have a specific group on the ACS that is then maped to a windows group, and when the...

I'm trying to set up authentication using a PIX 525 for some of our web servers. In preparation, I'm testing it on a PIX 515. For testing purposes, I'm not using a RADIUS or TACACS server.I've implemented the following commands:aaa-server LOCAL proto...

Hello, I have two ACS servers. One running 3.1 and the other is running 3.2. My plan is to decommission the 3.1 however, I would like to move the users from the old server to the new one. Is there a way to do it? I will need to migrate the user lis...

Hello,We have implimented an 5520 device and configured it for ACS successfully. I want to also have a local database with a few accounts in the event our ACS server went down. I am having trouble finding documentation for the syntax I need to enter...

HiWhat is the command for setting up the policy for password lenght in 7500 series (supported IOS ) ?What is the command to set number of failed attempts on TACACS authenticated users and also on local authenticated users? ( on 7500 series routers ...

Hello, it is possible that an ACS server authenticates with TACACS some clients and RADIUS other clients?Thank you.Regards

Hello, it is possible that an ACS server authenticates with TACACS some clients and RADIUS other clients?Thank you.Regards

We have several routers in the field that have DSL and use a VPN tunnel to get back to resources on the corporate network. I am trying to set up AAA on these routers to authenticate through our ACS server here, but I have been running into problems g...

I have a vpn 3005 concentrator in a dmz, directing authentication and authorisation back to a ACS Radius server. Authentication works fine, however as soon as I attempt to have the ACS server authorise as well, I received a Radius Access-reject(3) pa...