Network Access Control

Hi guys, I am still muddling around with my initial configuration of the ACS solution engine 4.1I was trying to install the "Generate the Self-Signed Certificate" but unfortunately when i enter the FTP hosts ip and a username/login followed by the "/...

Hi,I'm using ACS4.0 to deploy NAC Service.But can not see the field in internal posture vailidation like a attachments.does anyone know this reason?? please advise...

Hi Everyone,I have a situation that is driving me crazy. I am using Cisco Freeware TACACS running on RedHatEnterprise Linux 3. I've modified the source codeso that I can assign each individual users his/herown enable password. So far so good.I cre...

I would like to perform the initial configuration on a ACS but during the serial console connection I have always the same message:Error: Failed to get NIC configuration: rc = [-1] unkwown errorSomeone can help me?Thanks in advance.

I've got a question about AAA Authentication. There are no problems with a Cisco 3560 switch, the 4500 won't work.. Here is a part of my config:aaa new-modelaaa authentication login Radius-Authentication group radius localradius-server host 10.11.12....

I have enabled 8 ODBC connections for my accounting packets in CAR 4.1.2 and they are not utilized falling into a lot of ODBC timed out. I have played around with the timeouts but no result.What is you ideas?

Hi all,I would like to know if this scenario can be accomplished using ACS 4.1? The flow process are as follows:1. Cisco PSDN accepts wireless users for authentication & passes authentication details to ACS2. ACS establishes a connection to an extern...

Hi,Our company has 17 access points (1200) connected in our meeting rooms. Recently we purchased an ACS appliance to authenticate this access points. I would like to do this using uername&password(local database) and mac address authentication. is t...

Hello,I have been recently trying to get the built in Windows XP supplicant to function in the following way: using EAPOL-MSCHAPv2 with Username/Password/Domain credentials at the Windows login screen. No certificates, just a pre-shared key between ...

Hi allI have recently moved from ACS V3.2 to V4.0 this has not been without it's challanges and has not been as seemless as I expected.The main issue we have is our 3rd party access from our Cisco 3000 VPN concentrator.The problem I am having is unde...

I am unable to ping the ACS solution engine 4.0 from my Win 2003 Server with AD installed. But the ACS can access and ping my Win 2003 server. I can also access the ACS Console using the same server through the browser on the 2002 port.Wat am i doing...

I have a client that currently has ACS for windows and RSA ACE server running on a redundant pair of servers. His ACS version is 3.x. My question is when we upgrade him to 4.1 is it recommended that ACS reside on its own pair of redundant servers or ...

Hey guys, I have a small confusion regarding assigning IP addresses and dynamic vlan assignment on the ACS soln engine. This is the first time i am configuring it. We have over 1000 users to be divided into 20 or more VLAN's and the location is sprea...

I just recently completed my CCNA and im not sure about which CISCO certification to do next..should i do CCNP or CCSP..I hear CCSP has about 5 modules,when taking them is there a specific way im supposed to take them or can they just be taken random...

I have the following configuration on a 2950 Catalyst switchaaa new-modelaaa group server radius radServserver 10.1.9.100 auth-port 1645 acct-port 1813server 10.1.8.100 auth-port 1645 acct-port 1813!aaa authentication login default group radServ loca...