Network Access Control

Hi all,I am/will be beginning a deployment of dot1x to our campus. We will be authenticating to a Windows 2003 IAS Domain Controller, but I have a few questions before we begin:1) I have found no documentation as to the setup of switchports in rega...

I have my ASA5510 configured to authenticate VPN clients against an internal Win2003 IAS server. This works fine - users authenticate and can reach inside network. I have the ASA configured to allow HTTPS/ASDM access from the same inside net the us...

I would like to use TACACS+ authorization for allowing some limited allowed commands for a particular group, on a TACACS+ authenticated user. When i allow the group enable, i can't seem to limit the command level. aaa-server TACACS_SVR protocol tacac...

Hello,We have a customer who has 3 types of authentication needs:1) Laptop with windows based on user credential2) Industrial computer without 802.1x supplicant3) computer with windows but which need to be always in the same vlan (even if the user wh...

Hello,Is there a way to send the ACS log messages to a separate loggin server via syslog?

Hi I have a ACS v2.6 I would like to upgrade to a newer version 3.x or better. My question is do I have to purchase this new version? Can I download it for free from cisco? Which steps do I have to follow in order to upgrade this version???thanks a l...

Hi,We're implementing a NAC (framework) pilot and are experiencing clients that fail re-authentication with the following in the failed-attempts ACS 4 logging:"Access denied: fast-reconnect was successful but user was not found in cache"From what I s...

I have enabled "aaa authentication exclude" commad statement on PIX (6.3).This excludes the Hosts for which the Firewall doesnot prompt for authentication.What is the best way to add more lines into it.Do i have to remove all the commands and then al...

Dear Friends.... i am facing a problem in my ACS System .... the thing is thati am giving access through VPN and users can access to local resource and they are been Authinticate through the WINDOWS ACTIVE DIRECTORY but suddenly they can not access w...

How do I configure our ACS 4.0 server (and 2950 switch) to assign an 802.1x authenticated user to a specific vlan based on the AD group that the user is a member of in the Windows Domain?Example, Joe.Schmoe is an AD member of the group 'Sales' which ...

Hello Team,Please let me know whether I can configure Show Running-config at level 10 login. How can I see what all commands are available at a level other than 15. In other words what all command can be authorized at a level other than 15?Can I conf...

Okay here is a weird one:We use ASA'es for both IPSec and SSL VPN. The device use Radius against ACS for user authentication. The user database pulls from Active Directory. We also use the same ACS for TACACS for routers (also pulling passwords fro...

I'm currently testing 802.1x in our evironment and one of the things I want to do is mac-address authentication (basically a machine trying to connect to a port has to come up against our ACS server with these addresses). I can get it to work but for...

I am installing ACS V4.0 on WIN 2003 server. All the browser requirements ( IE V6.0, SP1) is present.But it is not displaying the initial configuration screen after installation.No errors etc. Then we try to change the various browser settings withou...

Its a client to PIX setup and i need to be able to connect to a server on the LAN. when i connect woith cisco vpn client it authentiate right away and i get an address from the VPN pool but i cant access or ping anything, not even the LAN interface o...